Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 175mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke175 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B
The AirTAC SAIF32X175S-06B is a double-acting ISO 15552 profile cylinder paired with a built-in 4M210-06 5/2 solenoid valve. Delivering a 14.0 mm2 effective area (Cv 0.78) and a maximum frequency of 5 cycles/sec, the integrated manifold uses O8 x O5 PU tubing to switch itself from a single DC24V terminal coil signal (3.0 W, IP65, 0.05 s response). The cylinder body features a PT1/8 port and includes an -S magnet for CMSE reed and DMSE electronic sensors.
While the bare cylinder rates to 1.0 MPa, the practical working range for this valved assembly is 0.15-0.8 MPa. In its factory setting, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. At 0.5 MPa, this 32 mm bore generates 402 N of push force and 345 N of pull force, providing self-contained decentralized motion without remote plumbing.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×175 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B Is Used
Decentralized Stations
Eliminates remote valve plumbing by driving the actuator directly from a single DC24V signal across sprawling factory layouts.
Space-Tight Machines
The integrated 4M210 manifold block saves valuable panel and tubing space in compact assembly machinery.
Retrofit Automation
Ideal for upgrading older pneumatic lines where adding new valve islands and long tubing runs is cost-prohibitive.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B the Right Choice?
Choose this self-valved SAIF unit when panel space is tight and running separate valve tubing across a large machine is costly; it eliminates the need for a remote valve bank. If your application requires greater thrust, stepping up to the 40 mm bore yields 628 N push at 0.5 MPa. For load-holding, note that the 5/2 valve routes air and does not lock the load—consider AirTAC SAIL for pneumatic locking.
This specific SKU requires a 175 mm stroke, a PT1/8 cylinder port, a 1/8" valve port, DC24V voltage, terminal electrical entry, and an -S magnet. Since the 175 mm stroke is 175 mm or greater, ensure adequate guiding to prevent excessive side-load wear on the rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B FAQ
The 32 mm bore generates 402 N push and 345 N pull force at 0.5 MPa. The built-in 4M210-06 valve provides a 14.0 mm2 effective area (Cv 0.78) with a maximum frequency of 5 cycles/sec.
By default, the rod retracts when the DC24V coil is energised, but you can reposition the valve to extend-when-energised. The integrated 5/2 valve switches the cylinder directly, saving space and wiring in decentralized installations.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X175S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.