Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 200mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke200 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B
The AirTAC SAIF32X200-06B is a double-acting ISO 15552 profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. Driven by a DC24V terminal entry coil drawing 3.0 W, it responds in 0.05 s. The integrated valve provides an effective area of 14.0 mm2 (Cv 0.78) and cycles up to 5 times per second. While the cylinder body rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa.
This compact 32 mm bore unit generates 402 N of push force at 0.5 MPa. The manifold connects to the cylinder via O8 x O5 PU tubing, meaning the 1/8" cylinder port and 1/8" valve port are distinct connections. Factory-set to retract when energised, the valve can be repositioned to extend on signal. It eliminates remote valves, saving panel space for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×200 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B Is Used
Decentralized Stations
Ideal for large machines with multiple small actuators, eliminating the need to run long air tubes back to a central valve manifold.
Compact Assembly Lines
Fits into tight machine envelopes where space is restricted, using the integrated 4M210 valve to minimize external plumbing.
Retrofit Automation
Perfect for upgrading existing pneumatic setups where adding a remote valve island would require extensive rewiring and tubing.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B the Right Choice?
Choose this 32 mm bore when 402 N push at 0.5 MPa is sufficient; step up to the 40 mm bore if you need 628 N. The SAIF32X200-06B excels in decentralized installations where running separate valve tubing is costly, switching itself from one DC24V coil signal. At 200 mm stroke, ensure adequate guide support to prevent side-loading on the rod. The 5/2 valve routes air but does not lock the load—use SAIL for pneumatic locking. Replacement requires matching bore, 200 mm stroke, 06 valve port, DC24V, PT thread, terminal entry, and no magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B FAQ
At 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78).
No, it switches itself using the built-in 4M210 5/2 valve driven by a DC24V terminal coil. By default, the rod retracts when energised, but repositioning the valve changes it to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X200-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.