Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 200mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke200 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B
The AirTAC SAIF32X200S-06B is a double-acting ISO 15552 profile cylinder paired with a built-in 4M210-06 5/2 solenoid valve. The integrated valve has a 1/8" port with a 14.0 mm2 orifice (Cv 0.78) and switches at up to 5 cycles per second. Driven by a DC24V terminal coil drawing 3.0 W, the unit carries an IP65 rating and activates in 0.05 seconds or less. The -S suffix indicates a piston magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches.
While the bare cylinder body rates to 1.0 MPa, the integrated valve operates from 0.15 to 0.8 MPa, setting the practical working pressure for this assembled unit. The 32 mm bore generates 402 N of push force at 0.5 MPa. By default, the factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. The manifold links the valve to the cylinder via an O8 x O5 PU tube, meaning the valve port differs from the cylinder port, eliminating remote plumbing and saving panel space.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×200 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B Is Used
Decentralized Machine Stations
Ideal for distributing actuators across large frames where running individual valve tubing back to a central manifold is costly and complex.
Compact Assembly Systems
The integrated valve manifold saves valuable panel and floor space, fitting neatly into tight automation cells.
Retrofit & Upgrade Projects
Perfect for upgrading existing ISO 15552 cylinders by adding self-switching capability without extensive pneumatic rewiring.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B the Right Choice?
Choose this self-valved SAIF unit when installing decentralized actuator stations across a large machine, as it removes the need for a separate remote valve and long tubing runs. If your application requires higher thrust, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. For this DC24V terminal configuration, ensure your control system matches the 3.0 W coil draw and utilizes PT threaded fittings for the 1/8" cylinder and valve ports. At a 200 mm stroke, the cylinder operates well within the 30-800 mm/s speed range, but always verify guide alignment to manage side loads.
Remember that the built-in 5/2 valve routes air but does not lock the load; if you need true position holding without live pressure, consider the AirTAC SAIL lock or BSAI clamp-lock series instead. When ordering a replacement, confirm the 32 mm bore, 200 mm stroke, 06 valve port, DC24V voltage, terminal entry, PT thread, and the -S magnet requirement.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B FAQ
The 32 mm bore generates 402 N of push force and 345 N of pull force at 0.5 MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and operates at up to 5 cycles per second.
No separate remote valve is needed; the DC24V coil directly drives the 5/2 valve. By factory default, energising the coil retracts the rod, but the valve can be repositioned to extend-when-energised. The valve holds its position pneumatically by pilot pressure, not by a spring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.