Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 200mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke200 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F
The AirTAC SAIF32X200S-06F is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78. Driven by a DC12V terminal entry coil drawing 3.0 W, it eliminates the need for a remote valve island. The cylinder body rates to 1.0 MPa, but because the integrated valve operates at 0.15-0.8 MPa, this defines the practical working range for the assembled unit.
It includes a magnet for CMSE reed and DMSE electronic sensors. The manifold links the valve to the cylinder via an O8xO5 PU tube, and the valve port (1/8) differs from the cylinder port (1/8). Factory-set to retract when energized, the valve can be repositioned to extend on signal, ideal for decentralized stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×200 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F Is Used
Decentralized Stations
Perfect for large machines with multiple nodes, allowing independent 12V control at each station without running long air tubes back to a central manifold.
Compact Clamping
Provides 402N push force at 0.5 MPa for small part clamping in machining cells where mounting space for a separate valve is unavailable.
Retrofit Automation
Ideal for upgrading older lines where adding centralized pneumatic plumbing is costly, utilizing the existing DC12V electrical infrastructure.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F the Right Choice?
Choose this 32mm bore when you need 345N pull force at 0.5 MPa and want to cut plumbing in tight spaces. If your application requires more thrust, stepping up to the 40mm bore yields 528N pull at the same pressure. The self-valved SAIF design beats a separate cylinder and remote valve by saving panel space and wiring, needing only a single DC12V signal to operate. For stroke lengths at or over 300mm, always use a guide to prevent side-load damage.
This unit cannot hold a load without live air pressure, as the 5/2 valve routes air but does not lock the piston; for true load-holding consider the SAIL series. To match this exact replacement, specify: 32mm bore, 200mm stroke, 06 valve port, DC12V coil, terminal entry, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N push and 345N pull force. The built-in 4M210-06 valve has a 14.0 mm2 orifice with a Cv of 0.78 and a max frequency of 5 cycles/sec.
No, the integrated 4M210 5/2 valve switches the cylinder directly from a DC12V terminal coil signal. By factory default, it retracts when energized, but you can reposition the valve to extend-when-energized.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X200S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.