Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 225mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke225 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A
The AirTAC SAIF32X225-06A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. This specific SKU is configured with an AC220V terminal electrical entry and a PT1/8 valve port, delivering a 14.0 mm2 effective area (Cv 0.78) flow capacity. Because the cylinder body rates to 1.0 MPa but the built-in valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. It generates 402 N of push thrust and 345 N of pull thrust at 0.5 MPa.
By switching itself from a single coil signal, this actuator eliminates the need for a separate remote valve, reducing plumbing and panel space for decentralized machine stations. The manifold connects to the cylinder using an O8 x O5 PU tube, while the factory default setting retracts the piston rod when the coil is energised. This behavior can be reconfigured to extend-when-energised simply by repositioning the valve.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×225 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A Is Used
Decentralized Assembly Stations
Ideal for large machines with multiple stations, eliminating long tubing runs by switching locally via the AC220V terminal coil.
Compact Clamping Fixtures
Delivers 402 N of push force at 0.5 MPa in tight spaces where mounting a separate 4M210 valve is impractical.
Retrofit Automation Upgrades
Simplifies machine upgrades by replacing a standard cylinder and remote valve plumbing with a single self-switching unit.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A the Right Choice?
Choose this 32 mm bore when you need compact force up to 402 N push at 0.5 MPa; stepping up to the 40 mm bore yields 628 N push, while dropping below 32 mm is not supported in the SAIF series. The integrated 4M210-06 valve hits a maximum frequency of 5 cycles per second, making the self-valved SAIF32X225-06A superior to a separate cylinder and remote valve when wiring and space are tight. The AC220V terminal coil draws 3.5 VA, features IP65 protection, and activates in 0.05 s or less. Remember that the 5/2 valve routes air but does not lock the load—use a SAIL lock cylinder for holding requirements.
To replace this unit, match the 32 mm bore, 225 mm stroke, 1/8 cylinder port, 4M210-06 valve port, AC220V voltage, terminal entry, and PT thread. This standard carbon steel rod version ships without a magnet; add an -S suffix if you require CMSE reed or DMSE electronic sensors. With a 225 mm stroke, ensure adequate guiding to prevent side-load wear on the piston rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A FAQ
At 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. The integrated 4M210-06 valve has a 14.0 mm2 effective area (Cv 0.78) and supports up to 5 cycles per second.
No separate remote valve is needed; the integrated 5/2 valve switches the cylinder directly from the AC220V coil signal. The factory default setting retracts the rod when energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X225-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.