Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 300mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke300 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A
The AirTAC SAIF32X300S-06A is a double-acting ISO 15552 profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. Driven by an AC220V terminal coil drawing 3.5 VA, it delivers a 0.78 Cv flow rate. The carbon steel rod provides 402N of push force at 0.5 MPa. While the bare cylinder rates to 1.0 MPa, the integrated valve limits the practical working range to 0.15-0.8 MPa.
This self-contained unit switches itself from one coil signal, eliminating remote valves and excess tubing for decentralized stations. The manifold connects via O8xO5 PU tubing, and the valve port (1/8) differs from the cylinder port (1/8). Factory set to retract when energised, the valve can be repositioned to extend on signal. The -S magnet supports CMSE reed and DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×300 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A Is Used
Decentralized Stations
Eliminates remote valve panels on large machines by switching directly at the cylinder, saving wiring and pneumatic plumbing.
Space-Tight Machines
The built-in 4M210 valve manifold minimizes envelope size where external valve islands cannot fit.
Retrofit Installations
Ideal for upgrading older pneumatic systems where routing new air tubing back to a central control is costly or impractical.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A the Right Choice?
Choose this 32mm bore when you need 402N push force at 0.5 MPa; step up to a 40mm bore if your application requires 628N. The integrated 4M210-06 valve makes this ideal for space-tight machines where running separate valve tubing is costly. For load-holding, note the 5/2 valve routes air but does not lock; consider SAIL for pneumatic locking. To replace this unit, match the 32mm bore, 300mm stroke, PT1/8 valve port, AC220V terminal coil, and -S magnet. At 300mm stroke, use proper guide rails to prevent side-load wear on the rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A FAQ
At 0.5 MPa, the 32mm bore provides 402N push and 345N pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 and a Cv of 0.78.
It requires one AC220V electrical signal to the terminal coil. The 5/2 valve switches the cylinder directly, and by default, the rod retracts when energised, though it can be reconfigured to extend.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.