Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 300mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke300 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C
The AirTAC SAIF32X300S-06C is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, yielding a Cv of 0.78. It features a 32mm bore and 300mm stroke, delivering 402N of push force at 0.5MPa. Driven by an AC110V terminal coil consuming 3.5 VA, the assembly includes a -S magnet for CMSE reed and DMSE electronic sensors. Because the integrated valve operates at 0.15-0.8 MPa, the practical working range for this valved unit is 0.15-0.8 MPa, despite the bare cylinder rating of 1.0 MPa.
By integrating the valve directly on the cylinder via a manifold block and O8xO5 PU tubing, this unit eliminates remote plumbing and saves panel space for decentralized stations. The factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised. Note that the valve port is 1/8 (code 06) while the cylinder port is PT1/8, and the 5/2 pilot holds position without a spring, though it will not lock a load without live pressure.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×300 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C Is Used
Decentralized Stations
Ideal for large machines with decentralized stations, driving the 32mm bore directly from an AC110V signal without running long valve tubing.
Space-Tight Machines
The integrated 4M210-06 valve saves panel space, fitting the 300mm stroke cylinder into compact assemblies where external valves won't fit.
Retrofit Installations
Perfect for retrofits where adding a remote valve manifold is costly; the self-contained 5/2 valve and CMSE/DMSE sensors simplify upgrades.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C the Right Choice?
Choose this self-valved SAIF model when wiring a separate remote valve is costly or space-prohibitive. If your application requires more push force, stepping up to the 40mm bore yields 628N at 0.5MPa. For load-holding applications, note that the built-in 5/2 valve routes air but does not lock; consider an SAIL lock cylinder instead. Since the 300mm stroke is significant, ensure adequate guide support to prevent rod side-loading. To replace this unit, match the 32mm bore, 300mm stroke, 06 valve port, AC110V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C FAQ
The 32mm bore generates 402N push and 345N pull at 0.5MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a max frequency of 5 cycles/sec.
Yes, the factory setting retracts the rod when the AC110V coil is energised, but you can reposition the valve to extend-when-energised. The built-in valve eliminates separate plumbing, saving space and wiring for decentralized control.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.