Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 300mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke300 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E
The AirTAC SAIF32X300S-06E is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78. Driven by an AC24V terminal entry coil drawing 3.5 VA, it switches itself from one electrical signal. Because the integrated valve operates at 0.15-0.8 MPa, this defines the practical working range for the assembled unit, even though the bare cylinder rates to 1.0 MPa. It yields 402N of push force at 0.5 MPa.
Factory set to retract the rod when the coil is energised, the valve can be repositioned to extend on signal if your sequence requires it. The manifold links the valve to the cylinder using O8xO5 PU tubing. This -S variant includes a magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches, and features a carbon steel piston rod with PT tapered threads.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC24V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×300 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| E | Coil voltage AC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E Is Used
Decentralized Assembly Stations
Eliminates the need for a remote valve island, letting each 32mm actuator control its own cycle directly from an AC24V signal.
Compact Sorting Lines
The integrated 4M210 valve and 300mm stroke provide extended reach for diverting parcels without crowding the main pneumatic panel.
Retrofit Automation
Ideal for upgrading older machines where running new valve tubing back to a central manifold is costly or physically blocked.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E the Right Choice?
Choose this 32mm bore when you need 402N push force at 0.5 MPa; step up to the 40mm bore if your load requires 628N. The 300mm stroke on this model demands a side-load guide to prevent rod binding. This self-valved SAIF eliminates remote plumbing and saves panel space, making it superior for decentralized stations. The 5/2 valve routes air but is not a lock; for load-holding use SAIL. To replace: verify 32mm bore, 300mm stroke, 06 (1/8) valve port, AC24V, terminal entry, PT threads, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E FAQ
At 0.5 MPa it provides 402N push and 345N pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a max frequency of 5 cycles/sec.
The factory default setting retracts the rod when the coil is energised. By repositioning the 5/2 valve on the manifold, you can reconfigure it to extend when energised. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06E
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.