Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 300mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke300 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F
The AirTAC SAIF32X300S-06F is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78 and a 14.0 mm2 effective area. Driven by a DC12V terminal coil drawing 3.0 W, it integrates the manifold block and short PU tubing (O8 x O5) directly onto the unit. Because the valve operates at 0.15-0.8 MPa, this defines the practical working range for the assembled SAIF, even though the cylinder body rates to 1.0 MPa.
In the 32mm bore class, this actuator provides 402N of push force and 345N of pull force at 0.5 MPa. The factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. Equipped with a magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×300 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F Is Used
Decentralized Stations
Ideal for large machines where running individual valve tubing back to a main panel is costly, allowing local DC12V control of the 32mm bore.
Compact Assembly Lines
Fits space-tight machinery by combining the cylinder and 5/2 valve into one envelope, delivering 402N push force at 0.5 MPa.
Retrofits & Upgrades
Perfect for upgrading a plain SAI cylinder to self-switching control, using the built-in 4M210-06 valve and CMSE/DMSE sensor tracking.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F the Right Choice?
Choose this self-valved SAIF32X300S-06F when decentralized machine stations require local control without a remote valve bank, saving wiring and panel space. If your application needs greater thrust, stepping up to the 40mm bore yields 628N push force at 0.5 MPa. For heavy load-holding, note that the 5/2 valve routes air but does not lock; consider SAIL or BSAI series for clamp-lock requirements.
With a 300mm stroke, ensure adequate guidance to prevent rod side-loading and premature seal wear. When ordering a replacement, verify the 32mm bore, 300mm stroke, 1/8" cylinder port, 4M210-06 valve port, DC12V voltage, terminal entry, PT tapered thread, and the -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F FAQ
At 0.5 MPa, the 32mm bore provides 402N push and 345N pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a max frequency of 5 cycles/sec.
The built-in 5/2 valve eliminates separate remote plumbing and allows decentralized control via one DC12V terminal signal. By default, the piston retracts when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X300S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.