Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 350mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke350 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A
The AirTAC SAIF32X350-06A is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78 and a 14.0 mm2 effective area. Driven by an AC220V terminal coil (3.5 VA, IP65, 0.05 s response), it generates 402 N of push force at 0.5 MPa. While the cylinder body rates to 1.0 MPa, the integrated valve limits the practical working range to 0.15-0.8 MPa.
This decentralized design eliminates remote valves and excess tubing, mounting directly at the station. The manifold links the valve to the cylinder using O8 x O5 PU tubing, and the valve's 1/8" port differs from the cylinder's 1/8" port. Factory-set to retract the rod when energised, the valve can be repositioned to extend on signal.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×350 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A Is Used
Decentralized Assembly Lines
Mounts directly at the station to actuate clamps without routing long valve tubing back to a central manifold.
Compact Sorting Modules
Provides 402 N push force in tight spaces where a separate valve would exceed the available envelope.
Retrofit Automation
Replaces standard cylinders needing remote valves by using a single AC220V coil signal for self-switching.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A the Right Choice?
Choose this 32mm bore when 402 N push force at 0.5 MPa is sufficient; step up to the 40mm bore if you need 628 N. The self-valved SAIF32X350-06A excels over a separate cylinder and remote valve by cutting panel space and wiring, ideal for decentralized machine layouts. This 350mm stroke requires external guide support to prevent rod side-load damage. Remember the 5/2 valve routes air but does not lock; for load-holding use SAIL or BSAI. Replacement requires matching bore, stroke, 06 valve port, AC220V terminal coil, PT thread, and no magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A FAQ
The 32mm bore generates 402 N push and 345 N pull force at 0.5 MPa. The integrated 4M210-06 valve provides a 14.0 mm2 effective area (Cv 0.78) with a maximum frequency of 5 cycles per second.
It features a built-in 5/2 solenoid valve that switches itself from one AC220V coil signal. By default the rod retracts when energised, but you can reposition the valve to extend-when-energised, saving panel space and plumbing.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.