Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 350mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke350 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B
The AirTAC SAIF32X350-06B is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering an effective flow of Cv 0.78. Driven by a DC24V terminal entry coil consuming 3.0 W, it activates in 0.05 s or less. While the cylinder body rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa. It delivers 402 N of push force at 0.5 MPa, fitting compact actuation needs.
By integrating the valve directly onto the manifold block via an O8 x O5 PU tube, this unit switches itself from one coil signal, eliminating remote plumbing and saving panel space for decentralized installations. The factory setting retracts the piston rod when the coil is energised, but you can reposition the valve to extend-when-energised. Note that the 1/8" cylinder port differs from the 1/8" valve port on the 4M210-06 manifold.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×350 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B Is Used
Decentralized Stations
Ideal for large machines with decentralized stations, eliminating long valve tubing runs by switching directly from the DC24V coil.
Compact Assembly Lines
Saves valuable panel space in tight machinery by mounting the 4M210 valve directly on the cylinder manifold block.
Retrofits & Upgrades
Perfect for upgrading existing lines where running new remote valve plumbing is costly, offering a self-contained 5/2 actuator.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B the Right Choice?
Choose this 32mm bore when 402 N push force at 0.5 MPa is sufficient; step up to the 40mm bore if you need 628 N. The self-valved SAIF32X350-06B beats a separate cylinder plus remote valve in space-tight machines by cutting tubing and wiring. It uses a DC24V terminal coil and PT threaded ports. Because the stroke is 350 mm, ensure adequate side-load guidance to prevent rod damage. For replacement, match the 32mm bore, 350mm stroke, 06 valve port, DC24V voltage, terminal entry, PT thread, and no magnet (-S). Remember, the 5/2 valve routes air but does not lock the load; for position holding, consider SAIL or BSAI.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B FAQ
The 32mm bore provides 402 N of push force at 0.5 MPa. The built-in 4M210-06 5/2 valve has a 14.0 mm2 orifice with an effective flow rate of Cv 0.78.
The DC24V coil drives the 5/2 valve, switching the cylinder without a separate remote valve. The factory setting retracts the rod when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X350-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.