Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 350mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke350 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C
The AirTAC SAIF32X350S-06C is a double-acting ISO 15552 profile cylinder fitted with a built-in 4M210-06 5/2 solenoid valve. This specific SKU features a PT1/8 valve port and an AC110V terminal coil consuming 3.5 VA, activating in 0.05 s. The integrated valve delivers a 14.0 mm2 (Cv 0.78) flow area, driving the 32 mm bore which generates 402 N of push force at 0.5 MPa. Because the manifold feeds the cylinder via an O8 x O5 PU tube, the valve port is distinct from the cylinder's own PT1/8 port.
While the bare cylinder rates to 1.0 MPa, the practical working range for this valved assembly is 0.15-0.8 MPa. It switches itself from a single coil signal, eliminating remote plumbing and saving panel space for decentralized stations. The factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. The -S magnet on this carbon steel rod unit works with AirTAC CMSE reed and DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×350 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C Is Used
Decentralized Stations
Ideal for large machines with multiple stations, routing a single electrical signal instead of long air lines to a central manifold.
Space-Tight Machines
The integrated valve eliminates the need for a separate valve bank, saving valuable panel and footprint space in compact assemblies.
Retrofit Automation
Perfect for upgrading existing lines where adding external valve plumbing is too costly or physically impractical.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C the Right Choice?
Choose this self-valved SAIF32X350S-06C when you need decentralized control without running separate valve tubing across a machine. If your application requires higher force, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Because the stroke is 350 mm, you must account for potential side loads and use a guide to prevent rod damage. The 4M210 valve holds its position by pilot pressure, not a spring, but it does not lock the load—if you need true position holding under pressure loss, select a SAIL lock cylinder instead. To replace this unit, match the 32 mm bore, 350 mm stroke, 06 valve port, AC110V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C FAQ
The 32 mm bore generates 402 N of push force and 345 N of pull force at 0.5 MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a max frequency of 5 cycles/sec.
The AC110V terminal coil (3.5 VA, IP65) energizes in 0.05 s to drive the 5/2 valve. By default, the rod retracts when energized, but you can reconfigure it to extend-when-energized by repositioning the valve. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.