Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 350mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke350 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F
The AirTAC SAIF32X350S-06F is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78. It features a 32mm bore and 350mm stroke, generating 345N of pull force at 0.5 MPa. Driven by a DC12V terminal entry coil drawing 3.0W, it activates in under 0.05s. The integrated manifold uses an O8xO5 PU tube to bridge the valve and cylinder, eliminating remote plumbing.
Because the 4M210 valve operates at 0.15-0.8 MPa, this defines the practical working range for the assembled unit, even though the cylinder body itself rates to 1.0 MPa. Factory-set to retract the rod when energised, the valve can be repositioned to extend on signal. This -S variant includes a magnet for CMSE reed and DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×350 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F Is Used
Decentralized Stations
Ideal for large machines with scattered actuation points, switching itself via the built-in 4M210 valve without a remote manifold.
Space-Tight Machines
Saves panel and tubing space by mounting the 5/2 valve directly on the profile cylinder body via a compact manifold block.
Retrofit Installations
Perfect for upgrades where adding DC12V wiring is easier than piping pneumatic lines to a central control bank.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F the Right Choice?
Choose this 32mm bore if you need 345N pull force at 0.5 MPa; stepping down is not an option in the SAIF range, but stepping up to a 40mm bore yields 528N pull. The 350mm stroke requires a side-load guide to prevent rod damage. This self-valved unit excels in decentralized stations where running separate valve tubing is costly, switching itself from one DC12V coil signal.
The 5/2 valve routes air but does not lock the load; for position holding, consider an AirTAC SAIL lock cylinder. To replace this unit, match the 32mm bore, 350mm stroke, 4M210-06 valve (1/8" port), DC12V terminal coil, PT threads, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F FAQ
At 0.5 MPa it provides 402N push and 345N pull force. The integrated 4M210-06 5/2 valve has an effective area of 14.0 mm2 (Cv 0.78).
No, the integrated 4M210 valve switches the cylinder directly from a DC12V signal. It is factory-set to retract when energised but can be reconfigured to extend by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X350S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.