Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 400mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke400 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C
The AirTAC SAIF32X400S-06C is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Driven by an AC110V terminal coil consuming 3.5 VA, it delivers a 402N push force at 0.5 MPa. The manifold connects via O8xO5 PU tubing, meaning the 1/8 inch cylinder port and 1/8 inch valve port are distinct. Because the built-in valve operates at 0.15-0.8 MPa, this defines the practical working range for the assembly.
By default, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. This self-switching design eliminates remote plumbing, saving panel space for decentralized machine stations. The -S magnet option supports CMSE reed and DMSE electronic sensors for position tracking.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×400 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C Is Used
Decentralized Stations
Perfect for large machines with decentralized stations, eliminating long air lines from a central panel.
Compact Assembly
Fits tight mechanical layouts where adding a separate remote valve and manifold block is unfeasible.
Wiring Retrofits
Ideal for retrofits where running new pneumatic tubing is costly, relying on a single electrical signal.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C the Right Choice?
Choose this 32mm bore when compact, self-valved actuation is needed; if your application requires greater thrust, stepping up to the 40mm bore yields a 628N push force at 0.5 MPa. The SAIF assembly is ideal when running separate valve tubing is costly or space-constrained, as one AC110V terminal signal directly controls the cylinder. Remember that the 5/2 valve routes air and is not a lock; for load-holding requirements, consider the SAIL lock cylinder. At 400mm stroke, ensure adequate guiding to prevent excessive side loads on the rod. Replacement requires matching the 32mm bore, 400mm stroke, 06 valve port, AC110V voltage, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C FAQ
The 32mm bore provides a 402N push force at 0.5 MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a max frequency of 5 cycles per second.
The 5/2 valve routes air and does not lock the load; use a SAIL cylinder for holding. By default, the rod retracts when the AC110V coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.