Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 400mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke400 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F
The AirTAC SAIF32X400S-06F is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78 and an effective orifice of 14.0 mm2. Driven by a DC12V terminal entry coil drawing 3.0 W, it integrates switching directly on the actuator. The carbon steel piston rod and -S magnet option support precise position sensing via AirTAC CMSE reed and DMSE electronic switches.
Because the cylinder body rates to 1.0 MPa but the internal valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. The manifold connects to the cylinder using O8xO5 PU tubing, meaning the 1/8" cylinder port and 1/8" valve port are distinct connections. Factory-set to retract when energized, the valve can be repositioned to extend on signal, eliminating remote plumbing for decentralized stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×400 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F Is Used
Decentralized Assembly Stations
Eliminates the need for remote valve manifolds by switching locally via DC12V signal, drastically reducing tubing runs across large automated assembly lines.
Compact Sorting Diverters
Provides 402N push force at 0.5 MPa for 400mm travel diverters, fitting neatly into space-constrained conveyor frameworks without separate valve plumbing.
Retrofit Automation Upgrades
Ideal for upgrading existing ISO 15552 machines where routing new pneumatic tubing to a central panel is costly, utilizing the integrated 4M210-06 valve.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F the Right Choice?
Choose this 32mm bore when you need 402N push force at 0.5 MPa in tight spaces; step up to a 40mm bore if your application requires 628N. The 400mm stroke is well within the 1000mm maximum but requires a side-load guide to prevent rod damage over extended travel. The built-in valve switches itself from one DC12V signal, saving panel space and tubing versus a separate cylinder and remote valve. Remember that the 5/2 valve routes air and is not a lock; the air cushion only decelerates near stroke ends. For load-holding, select a SAIL lock cylinder. Replacement requires exact bore, stroke, PT1/8 valve port, DC12V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F FAQ
At 0.5 MPa, this 32mm bore cylinder generates 402N push and 345N pull force. The integrated 4M210-06 5/2 valve has an effective orifice of 14.0 mm2 and a Cv of 0.78, with a maximum frequency of 5 cycles per second.
No, it features a built-in 4M210-06 valve driven by a DC12V terminal coil (3.0 W, IP65). By default, the piston rod retracts when the coil is energized, but it can be reconfigured to extend-when-energized by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X400S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.