Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 450mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke450 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C
The AirTAC SAIF32X450S-06C is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Driven by an AC110V terminal coil drawing 3.5 VA, it delivers a Cv of 0.78 and pushes with 402N of force at 0.5 MPa. The cylinder body rates to 1.0 MPa, but because the built-in valve operates at 0.15-0.8 MPa, the practical working range for the assembled unit is 0.15-0.8 MPa. It includes a magnet for CMSE reed and DMSE electronic sensors.
By switching itself from a single coil signal, this unit eliminates remote plumbing and saves panel space, making it perfect for decentralized stations. The manifold connects to the cylinder via O8xO5 PU tubing. From the factory, the piston rod retracts when the coil is energized, but you can reposition the valve to extend-when-energized if your logic requires it.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×450 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C Is Used
Decentralized Stations
Ideal for large machines with many nodes, eliminating long tubing runs by switching locally via the AC110V coil signal.
Compact Assembly
Fits space-tight machinery where mounting a separate valve island is impossible, providing 402N push force cleanly.
Retrofit Upgrades
Drops into existing ISO 15552 footprints to add self-switching logic without re-engineering the pneumatic panel.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C the Right Choice?
Choose this 32mm bore when you need 402N push force at 0.5 MPa; step up to the 40mm bore if you require 628N. The 450mm stroke is well within the 1000mm standard limit, but at this length you should use a guide to prevent rod side-loading and premature seal wear. This self-valved design beats a separate cylinder and remote valve in space-tight machines by cutting tubing runs and wiring. The 5/2 valve routes air and is not a lock, so for load-holding applications consider the SAIL lock cylinder. Replacement requires matching the 32mm bore, 450mm stroke, 06 (1/8) valve port, PT1/8 cylinder port, AC110V terminal coil, and the -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C FAQ
It delivers 402N push and 345N pull force at 0.5 MPa. The integrated 4M210-06 valve has a 14.0 mm2 orifice, providing a Cv of 0.78.
No, the integrated 5/2 valve switches the cylinder directly from the AC110V signal. The factory setting retracts the rod when energized, which can be reconfigured to extend-when-energized by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X450S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.