Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 50mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke50 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A
The AirTAC SAIF32X50S-06A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Equipped with a magnetic piston for CMSE or DMSE sensors, it delivers 402N of push force at 0.5MPa. Driven by an AC220V terminal-entry coil consuming 3.5 VA, the assembly operates safely within 0.15-0.8MPa because the internal pilot valve dictates the pressure ceiling, not the 1.0MPa cylinder body rating.
By mounting the valve directly via a manifold block and O8xO5 PU tubing, it eliminates remote plumbing and saves panel space. The factory default retracts the rod when the coil energizes, but you can reposition the valve to extend on signal. This decentralized architecture means one electrical connection actuates the cylinder without a separate valve island.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×50 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A Is Used
Compact Assembly Stations
Perfect for decentralized cells where 402N force is enough, eliminating the need to route tubing back to a central valve manifold.
Electronic Pick & Place
The built-in 4M210 valve and magnetic piston allow tight-cycle handling with CMSE/DMSE sensor feedback.
Retrofit Automation
Ideal for upgrading older machines by adding self-switching actuation without extensive pneumatic rewiring.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A the Right Choice?
Choose this 32mm bore when 402N push force at 0.5MPa is sufficient; if your application needs 628N push, step up to the 40mm bore. The SAIF32X50S-06A is ideal for space-constrained machines where running separate valve tubing is costly, as the built-in 4M210 valve handles switching locally. It includes a -S magnet for position sensing.
For load-holding applications, note that the 5/2 valve routes air but does not lock the piston, so consider an SAIL lock cylinder instead. When ordering a replacement, verify the 50mm stroke, PT1/8 cylinder port, 1/8 valve port code 06, AC220V voltage, terminal entry, PT thread, and the magnetic piston requirement.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A FAQ
The 32mm bore generates 402N push and 345N pull force at 0.5MPa. The integrated 4M210-06 valve has a 14.0mm2 orifice with a Cv of 0.78.
No, the SAIF32X50S-06A has a built-in 4M210 5/2 valve. It operates directly from an AC220V terminal connection, and by default retracts the rod when energized, but can be reconfigured to extend on signal.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X50S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.