Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 75mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke75 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A
The AirTAC SAIF32X75S-06A is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78 and a 14.0 mm2 flow area. Driven by an AC220V terminal coil, it consumes 3.5 VA and responds in 0.05 seconds. The integrated manifold uses an O8 x O5 PU tube to link the valve to the cylinder, meaning the 1/4" valve port and 1/8" cylinder port are distinct. Because the valve operates at 0.15-0.8 MPa, this defines the practical working range for the assembled SAIF unit, even though the bare cylinder rates to 1.0 MPa.
In this 32mm bore configuration, the cylinder generates 402N of push force at 0.5 MPa. The factory setting retracts the piston rod when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. Fitted with a magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. By switching itself from a single coil signal, it eliminates remote plumbing and is ideal for decentralized stations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×75 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A Is Used
Decentralized Assembly Stations
Ideal for large machines with multiple small actuators, eliminating long valve tubing runs by controlling the 32mm bore directly at the station.
Space-Constrained Machinery
The integrated 4M210 valve manifold saves valuable panel and floor space when building compact automated equipment.
Retrofit and Upgrades
Perfect for upgrading existing ISO 15552 cylinder setups where adding a separate remote valve bank is costly or physically impossible.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A the Right Choice?
Choose this 32mm bore SAIF when your application requires around 402N of push force at 0.5 MPa; if you need greater thrust, stepping up to the 40mm bore yields 628N under the same pressure. The self-valved design beats a separate cylinder plus remote valve in space-constrained machines, as it cuts tubing runs and panel footprint. For replacements, verify the 75mm stroke, 1/8" cylinder port, 06 (1/8") valve port, AC220V terminal coil, PT thread, and magnet (-S). Note that the 5/2 valve routes air but does not hold the load without live pressure; for true locking, consider the SAIL series. Strokes under 300mm do not require auxiliary side-load guides.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A FAQ
The 32mm bore generates 402N push and 345N pull force at 0.5 MPa. The built-in 4M210-06 5/2 valve provides an effective flow area of 14.0 mm2 (Cv 0.78).
The built-in 4M210 valve allows the cylinder to switch itself from a single AC220V coil signal without needing a separate remote valve. By default, the factory setting retracts the rod when energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.