Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 75mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke75 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B
The AirTAC SAIF32X75S-06B is a double-acting profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering an effective flow of Cv 0.78. Equipped with a DC24V terminal coil that consumes 3.0 W and features IP65 protection, it switches itself from a single electrical signal. While the cylinder body rates to 1.0 MPa, the integrated valve limits the practical operating range to 0.15-0.8 MPa.
This compact 32mm bore generates 402N of push force at 0.5 MPa. The manifold connects the valve to the cylinder using O8xO5 PU tubing, and the unit includes a magnet for CMSE reed and DMSE electronic sensors. By default, the rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×75 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B Is Used
Decentralized Assembly Stations
Eliminates remote valve plumbing by driving the 402N rod directly from the built-in 4M210 valve, saving panel space on large machines.
Space-Constrained Automation
The integrated 32mm profile cylinder and manifold block deliver compact actuation where running separate valve tubing is physically impractical.
Sensor-Ready Conveyors
The -S magnet works seamlessly with CMSE and DMSE switches for end-of-stroke detection in fast, 5 cycle/sec sorting lines.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B the Right Choice?
Choose this 32mm self-valved unit when a decentralized station requires 402N push force at 0.5 MPa without the plumbing of a remote valve. If your application needs 628N push force, step up to the 40mm bore. The 4M210-06 valve features a 1/8" port and operates up to 5 cycles per second. For higher flow demands, consider the 1/4" ported 4M210-08 variant.
Remember that the 5/2 valve routes air but does not lock the load; for position holding, select a SAIL lock cylinder. To replace this unit, match the 32mm bore, 75mm stroke, PT1/8 cylinder port, 06 valve port, DC24V voltage, PT thread, terminal entry, and the -S magnet option.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B FAQ
The 32mm bore generates 402N push and 345N pull force at 0.5 MPa. The built-in 4M210-06 5/2 valve provides an effective area of 14.0 mm2 (Cv 0.78) and supports a maximum frequency of 5 cycles per second.
No, the 4M210 valve is built directly onto the cylinder via a manifold block using PU tubing. It operates on DC24V at 3.0 W. By factory default, the rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.