Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 75mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke75 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F
The AirTAC SAIF32X75S-06F is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Equipped with a DC12V terminal coil, this self-switching unit delivers a 14.0 mm2 effective area (Cv 0.78) and generates 402 N of push force at 0.5 MPa. The included -S magnet enables precise position detection with CMSE reed and DMSE electronic sensors. Because the manifold routes air internally via an O8 x O5 PU tube, you eliminate remote plumbing and save valuable panel space.
While the cylinder body rates to 1.0 MPa, the built-in valve limits the practical SAIF operating range to 0.15-0.8 MPa. Factory-set to retract the rod when the coil energises, the valve can be repositioned for extend-when-energised operation. The 5/2 valve holds position pneumatically via internal pilot, not a spring, making it ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×75 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F Is Used
Compact Part Ejection
Ideal for decentralized stations needing a single DC12V signal to drive a 402N push action without external valve tubing.
Space-Constrained Machinery
The built-in 4M210 valve and O8xO5 PU manifold save panel space in tight machine layouts while maintaining ISO 15552 mounting.
Retrofitted Automation
Perfect for upgrading older lines where running new pneumatic tubing to a remote valve island is costly and complex.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F the Right Choice?
Choose this 32mm bore when compact actuation is needed; step up to the 40mm bore if you require 628 N of push force at 0.5 MPa. The SAIF32X75S-06F excels over a separate cylinder and remote valve in space-constrained machines by integrating the 4M210 valve directly on the assembly. With a 75mm stroke, side-load is minimal, but always verify guide alignment. For replacements, match the 32mm bore, 75mm stroke, 1/8" cylinder port, 06 valve port, DC12V voltage, terminal entry, PT thread, and -S magnet.
Remember that the air cushion only decelerates the rod near stroke end; it is not a lock. If your application requires true load-holding without live pressure, consider the SAIL lock or BSAI clamp-lock cylinder series instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F FAQ
The 32mm bore generates 402 N push force at 0.5 MPa. The built-in 4M210-06 valve provides a 14.0 mm2 effective area (Cv 0.78) with a maximum frequency of 5 cycles/sec.
Yes, the factory setting retracts the rod on DC12V coil energisation, but you can reposition the valve to extend-when-energised. The built-in 5/2 valve eliminates the need for a separate remote valve, reducing plumbing and panel space.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.