Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 75mm stroke and a built-in 4M210-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke75 mm
- Built-in valve4M210-08
- Valve port1/4"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A
The AirTAC SAIF32X75S-08A is a double-acting ISO 15552 profile cylinder with a built-in 4M210-08 5/2 solenoid valve, delivering a Cv of 0.89. It features a 32mm bore, 75mm stroke, and a carbon steel piston rod. Driven by an AC220V terminal coil drawing 3.5 VA, the unit responds in 0.05s. Because the valve operates at 0.15-0.8 MPa, this sets the practical working pressure range for the assembled module, even though the cylinder body rates to 1.0 MPa.
This self-contained design eliminates remote plumbing, saving panel space and tubing. The manifold connects the valve to the cylinder using O8xO5 PU tubing. Note that the valve port is 1/4" while the cylinder port is 1/8". Factory-set to retract the rod when energized, the valve can be repositioned for extend-when-energized operation. The -S magnet supports CMSE reed and DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-08 (5/2) |
|---|---|
| Valve flow | 16.0 mm² (Cv 0.89) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×75 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M210-08. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A Is Used
Decentralized Stations
Distributes actuation across large machines by integrating the 5/2 valve directly on the cylinder, minimizing main panel wiring and pneumatic tubing runs.
Compact Assembly Tooling
Fits into tight machine envelopes where space is restricted, providing 724N of push force at 0.9MPa without needing a separate valve manifold nearby.
Retrofit Automation
Simplifies upgrades to existing lines by using an all-in-one ISO 15552 actuator, avoiding the cost and complexity of running new valve control tubing.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A the Right Choice?
Choose this 32mm bore when you need 402N push force at 0.5MPa or 724N at 0.9MPa. If your application requires more thrust, stepping up to the 40mm bore yields 628N push at 0.5MPa. This self-valved SAIF unit is superior to a separate cylinder and remote valve when decentralizing stations across a large machine, as it requires only a single AC220V terminal connection and air supply. The 5/2 valve routes air but does not hold the load without live pressure; for position holding, consider the SAIL lock cylinder. To replace this unit, match the 32mm bore, 75mm stroke, 1/4" valve port, AC220V terminal coil, PT threads, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A FAQ
The 32mm bore cylinder provides 402N push and 345N pull force at 0.5MPa. The integrated 4M210-08 5/2 valve has an effective orifice of 16.0mm2 (Cv 0.89) and supports a maximum frequency of 5 cycles per second.
No, the SAIF32X75S-08A features a built-in 4M210-08 valve driven by an AC220V terminal coil. By default, the piston rod retracts when the coil is energized, but it can be reconfigured to extend-when-energized by repositioning the valve.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.