Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 75mm stroke and a built-in 4M210-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke75 mm
- Built-in valve4M210-08
- Valve port1/4"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C
The AirTAC SAIF32X75S-08C is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-08 5/2 solenoid valve. Driven by an AC110V terminal coil, it delivers a 0.5 MPa push force of 402N. The built-in valve offers an effective flow Cv of 0.89 and cycles up to 5 times per second. Because the manifold connects to the cylinder via PU tubing, the valve port (1/4) differs from the cylinder port (1/8).
This assembly controls itself from a single electrical signal, eliminating remote plumbing and saving panel space for decentralized machine stations. While the cylinder body rates to 1.0 MPa, the internal pilot valve limits the practical operating range to 0.15-0.8 MPa. Factory set to retract the rod when energized, the valve can be repositioned to extend on signal. The -S magnet supports CMSE reed and DMSE electronic sensors for position detection.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-08 (5/2) |
|---|---|
| Valve flow | 16.0 mm² (Cv 0.89) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×75 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M210-08. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C Is Used
Decentralized Stations
Perfect for large machines with distributed stations, minimizing tubing runs back to a central valve island.
Compact Clamping
Provides localized 402N clamping force in tight spaces where external plumbing would interfere.
Retrofit Actuators
Ideal for machine upgrades where running new pneumatic lines to a separate valve is costly or impractical.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C the Right Choice?
Choose this self-valved 32mm bore unit when compact, localized actuation is required over a separate cylinder and remote valve setup. If your application needs greater thrust, stepping up to the 40mm bore raises the 0.5 MPa push force to 628N. For heavier loads, remember the 5/2 valve routes air but does not lock the piston; consider a SAIL lock cylinder for true load holding. This 75mm stroke is well within standard limits and requires no external guide. Replacement units must match the 32mm bore, 75mm stroke, 1/4 valve port, AC110V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C FAQ
At 0.5 MPa, the 32mm bore generates 402N of push force and 345N of pull force. The built-in 4M210-08 valve provides a Cv of 0.89 with a 16.0mm effective orifice area.
This specific SKU uses an AC110V terminal entry coil. By default, the piston rod retracts when the coil is energized, but you can reposition the valve to extend when energized. The integrated valve means no separate remote valve is needed.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.