Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 75mm stroke and a built-in 4M210-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke75 mm
- Built-in valve4M210-08
- Valve port1/4"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F
The AirTAC SAIF32X75S-08F is a double-acting ISO 15552 profile cylinder with a built-in 4M210-08 5/2 solenoid valve, delivering a 16.0 mm2 effective area (Cv 0.89). It operates on DC12V via a terminal electrical entry, drawing just 3.0 W with an IP65 rating and a 0.05 s response time. The cylinder port is PT1/8, while the valve port is 1/4", linked internally by an O8 x O5 PU tube.
Because the valve manifold mounts directly to the profile barrel, this unit switches itself from one coil signal, eliminating remote plumbing and saving panel space for decentralized machine stations. The cylinder body rates to 1.0 MPa, but the integrated valve limits the practical SAIF working range to 0.15-0.8 MPa. Factory-set to retract the rod when energised, the valve can be repositioned to extend-when-energised. The -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-08 (5/2) |
|---|---|
| Valve flow | 16.0 mm² (Cv 0.89) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×75 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M210-08. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F Is Used
Decentralized Stations
Ideal for large machines with multiple nodes, eliminating long tubing runs by switching locally via the integrated 4M210 valve.
Compact Assembly
Fits space-tight machinery where a separate valve would exceed the envelope, providing 402 N push force in a self-contained ISO 15552 profile.
Low-Voltage Retrofits
The DC12V terminal coil simplifies wiring in retrofit applications where running high-voltage power to remote pneumatic panels is costly.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F the Right Choice?
Choose this 32 mm bore when you need 402 N of push force at 0.5 MPa in a compact, self-contained package. If your application requires less force, a smaller cylinder is needed, but if you need 628 N push force, step up to the 40 mm bore. The SAIF format is superior to a separate cylinder and remote valve when wiring and tubing a decentralized station, as the DC12V terminal coil and integrated 4M210 valve simplify installation. For load-holding, note that the 5/2 valve routes air and is not a lock; consider SAIL for pneumatic locking needs. This exact replacement matches: 32 mm bore, 75 mm stroke, 1/4" valve port, DC12V, terminal entry, PT threads, and includes a magnet (-S).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F FAQ
At 0.5 MPa, the 32 mm bore provides 402 N of push force and 345 N of pull force. The built-in 4M210-08 valve has an effective area of 16.0 mm2 (Cv 0.89) and a maximum frequency of 5 cycles per second.
No, the SAIF32X75S-08F has a built-in 4M210 5/2 valve driven by a DC12V coil. By factory default, the piston rod retracts when the coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X75S-08F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.