Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 80mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke80 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A
The AirTAC SAIF32X80S-06A is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve. Featuring a 1/8" valve port and PT 1/8" cylinder port, it delivers a push force of 402N at 0.5 MPa. This AC220V terminal entry coil draws 3.5 VA, activates in 0.05s, and carries an IP65 rating. The integrated manifold uses O8xO5 PU tubing to bridge the valve and cylinder. Because the 4M210 valve operates at 0.15-0.8 MPa, the practical working range for the assembled SAIF unit is 0.15-0.8 MPa, even though the cylinder body rates to 1.0 MPa.
By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. This self-switching design eliminates the need for a remote valve, reducing panel space and tubing runs for decentralized machine stations. The -S magnet option supports CMSE reed and DMSE electronic sensors for precise position tracking.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×80 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A Is Used
Decentralized Stations
Perfect for large machines with decentralized control, eliminating long tubing runs from a central panel.
Compact Assembly
Ideal for tight machinery spaces where a separate valve and manifold block would not fit.
Retrofit Projects
Simplifies upgrades on existing lines by requiring only a single AC220V coil signal per cylinder.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A the Right Choice?
Choose this 32mm bore when your application requires 402N push force at 0.5 MPa; step up to the 40mm bore if you need 628N. The SAIF32X80S-06A is ideal for decentralized stations where running separate valve tubing is costly or space-prohibited. It includes a 4M210-06 valve with a 06 (1/8") port, AC220V voltage, terminal entry, PT thread, and an -S magnet. For exact replacement, match the bore, stroke, valve port, coil voltage, entry, thread, and magnet option. Since the stroke is 80mm, side-load guides are not strictly necessary, but ensure the load is aligned to prevent premature seal wear. Remember, the built-in 5/2 valve routes air but does not hold the load without live pressure; for locking, consider SAIL or BSAI.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A FAQ
At 0.5 MPa, the 32mm bore provides 402N push and 345N pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78).
Yes, the factory setting retracts the rod when the AC220V coil is energised, but it can be repositioned to extend-when-energised. The integrated 5/2 valve switches the cylinder directly from one coil signal, saving wiring and panel space.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.