Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 80mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke80 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B
The AirTAC SAIF32X80S-06B is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a 14.0 mm2 flow (Cv 0.78). Driven by a DC24V terminal entry coil drawing 3.0 W, it responds in 0.05 s. The integrated valve operates at 0.15-0.8 MPa, making this the practical working range for the assembled unit, even though the cylinder body rates to 1.0 MPa. It delivers 402N push force at 0.5 MPa.
This self-contained unit switches itself from one coil signal, eliminating remote plumbing and saving panel space for decentralized machine stations. The manifold connects to the cylinder via O8xO5 PU tubing, and the valve port (1/8) differs from the cylinder port (1/8). Factory-set to retract when energised, the valve can be repositioned to extend on signal. The -S magnet works with CMSE reed and DMSE electronic sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×80 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B Is Used
Decentralized Stations
Eliminates remote valve islands by switching directly at the cylinder, drastically reducing tubing runs across large automated machinery.
Space-Tight Machines
The integrated manifold block saves valuable panel space, ideal for compact assemblies where a separate valve would not fit.
Retrofit Installations
Perfect for upgrading existing lines where routing new pneumatic tubing to a central manifold is expensive or impractical.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B the Right Choice?
Choose this 32mm bore when you need 402N push force at 0.5 MPa; step up to the 40mm bore if your application requires 628N. The SAIF32X80S-06B excels in tight layouts where running separate valve tubing is costly, as the built-in valve removes the need for a remote island. It is not a load-holding device; the 5/2 valve routes air but does not lock the piston, so look to SAIL for braking needs. The DC24V terminal coil, PT threaded ports, and 80mm stroke make it a direct replacement for decentralized setups requiring position feedback.
For this 80mm stroke, side-load is minimal, but always ensure proper alignment to maximize seal life.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N push and 345N pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a max frequency of 5 cycles/sec.
It requires only one DC24V electrical signal to the terminal coil. The 5/2 valve switches the cylinder directly, and by factory default, the rod retracts when the coil is energised, though it can be reconfigured to extend.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.