Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 80mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke80 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C
The AirTAC SAIF32X80S-06C is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Equipped with a 1/8" valve port and a PT 1/8" cylinder port, the valve achieves a 14.0 mm2 effective area (Cv 0.78). This specific unit utilizes an AC110V terminal coil drawing 3.5 VA, protected to IP65 with a 0.05 s response time. The assembly includes an -S magnet for position sensing with CMSE reed or DMSE electronic switches. Because the valve operates at 0.15-0.8 MPa, this defines the practical working range for the assembled unit, even though the bare cylinder rates to 1.0 MPa.
By default, the factory valve configuration retracts the piston rod when the coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve. At 0.5 MPa, this 32mm bore generates 402N of push force and 345N of pull force. The integrated manifold uses O8 x O5 PU tubing to bridge the valve and cylinder, eliminating the need for a separate remote valve. This self-switching design drastically reduces plumbing and panel space, making it highly effective for decentralized stations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×80 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C Is Used
Decentralized Assembly Stations
Ideal for large machines with distributed stations, eliminating long pneumatic tubing runs back to a central valve island.
Compact Clamping Fixtures
Provides 402N of push force at 0.5 MPa in tight spaces where mounting a separate valve is physically impossible.
Retrofit Automation
Perfect for upgrading existing ISO 15552 setups by adding self-switching control without extensive panel rewiring.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C the Right Choice?
Choose this 32mm SAIF model when compact actuation and decentralized control are required. If your application demands greater thrust, stepping up to the 40mm bore yields 628N of push force at 0.5 MPa. Conversely, if you need higher flow or faster cycling, the 4M210-08 port option offers a 16.0 mm2 orifice (Cv 0.89) compared to this 06 port's 14.0 mm2. The AC110V terminal entry provides straightforward wiring for standard control systems.
This self-valved unit excels over a separate cylinder and remote valve by cutting down tubing runs and wiring complexity. Note that the built-in 5/2 valve routes air and holds its position via internal pilot pressure, but it is not a lock; if you need true load holding, consider the SAIL (lock) or BSAI (clamp-lock) series. When replacing, match the 32mm bore, 80mm stroke, 06 valve port, AC110V terminal coil, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C FAQ
At 0.5 MPa, this 32mm cylinder provides 402N of push force and 345N of pull force. The built-in 4M210-06 valve has a 14.0 mm2 effective area (Cv 0.78) and can cycle up to 5 times per second.
No, the 5/2 valve is internally piloted and switches directly from the AC110V terminal coil signal. By default, it retracts the rod when energised, but you can reposition the valve to extend-when-energised.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X80S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.