Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 100mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke100 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C
The AirTAC SAIF40X100S-06C is a double-acting profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a 14.0 mm2 effective area (Cv 0.78). Driven by an AC110V terminal coil consuming 3.5 VA, it activates in 0.05 s. While the base cylinder rates to 1.0 MPa, the integrated valve operates at 0.15-0.8 MPa, setting the practical working range for the assembly. It delivers 628N push force at 0.5 MPa.
By integrating the valve directly on a manifold block with O8 x O5 PU tubing, this unit switches itself from one coil signal, eliminating remote plumbing. The factory setting retracts the piston rod when the coil is energised, which you can reconfigure to extend-when-energised by repositioning the valve. Fitted with a magnet for CMSE reed and DMSE electronic sensors, it suits decentralized stations across large machines.
Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×100 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C Is Used
Decentralized Machine Stations
Eliminates the need for a remote valve island on large assembly lines, driving the 40mm bore directly from the integrated 4M210 valve.
Space-Constrained Automation
Saves panel space and reduces plumbing complexity by mounting the 5/2 valve and manifold directly on the profile cylinder body.
Retrofit Projects
Ideal for upgrading existing pneumatic setups where routing new valve tubing is costly, simply wire the AC110V terminal coil.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C the Right Choice?
Choose this AC110V terminal-entry model when you need decentralized control without running separate valve tubing. If your application requires higher thrust, stepping up to the 50mm bore yields 982N push at 0.5 MPa. For load-holding, note that the 5/2 valve routes air but does not lock the piston; consider SAIL or BSAI series for clamp-lock needs. When ordering replacements, match the 40mm bore, 100mm stroke, 1/8 valve port, AC110V voltage, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C FAQ
The 40mm bore generates 628N push and 528N pull force at 0.5 MPa. The built-in 4M210-06 5/2 valve has a 14.0 mm2 effective area (Cv 0.78) with a maximum frequency of 5 cycles per second.
No, it features a built-in 4M210 5/2 valve operating at 0.15-0.8 MPa. By default, the piston rod retracts when the AC110V coil is energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X100S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.