Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 125mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke125 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E
The AirTAC SAIF40X125S-06E is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Driven by an AC24V terminal coil drawing 3.5 VA, it delivers 628 N of push force at 0.5 MPa. The cylinder body rates to 1.0 MPa, but because the built-in valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. A magnet is included (-S) for CMSE reed and DMSE electronic sensors.
By switching itself from one coil signal, this unit eliminates remote valves and excess tubing, making it ideal for decentralized stations across large machines. The manifold connects to the cylinder via O8 x O5 PU tubing, while the valve uses a 1/8" port and the cylinder port is 1/4". Factory-set to retract when energised, the valve can be repositioned to extend on signal. It responds in 0.05 s and carries an IP65 rating.
Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 125 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC24V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×125 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| E | Coil voltage AC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E Is Used
Decentralized Automation
Perfect for distributing actuation points across a large machine without routing long valve tubing back to a central manifold.
Compact Assembly Stations
The integrated valve saves valuable panel and footprint space in tight machinery where a separate valve would not fit.
Sensor-Equipped Positioning
The -S magnet enables precise end-of-stroke detection using CMSE reed or DMSE electronic switches for confirmations.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E the Right Choice?
Choose this 40 mm bore when a 32 mm bore (402 N push at 0.5 MPa) is underpowered, but a 50 mm bore (982 N) is physically excessive. The self-valved SAIF architecture is superior to a separate cylinder and remote valve when panel space is tight and running air tubing across a large machine is costly. This specific configuration uses an AC24V terminal entry coil with PT tapered threads.
For load-holding applications, note that the 5/2 valve routes air but does not lock the piston; refer to the SAIL series for pneumatic locking. When ordering a replacement, match the 40 mm bore, 125 mm stroke, 1/8" valve port, AC24V voltage, terminal entry, PT threads, and the -S magnet. Stroke is 125 mm, so standard mounting is fine without auxiliary guides.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E FAQ
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. The integrated 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and a maximum frequency of 5 cycles per second.
No, it features a built-in 4M210 5/2 solenoid valve driven by an AC24V terminal coil. By default, the piston rod retracts when the coil is energised, but the valve can be repositioned to extend-when-energised if needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X125S-06E
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.