Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 200mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke200 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B
The AirTAC SAIF40X200S-06B is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M210-06 5/2 solenoid valve, delivering a 14.0 mm2 effective area (Cv 0.78). Driven by a DC24V terminal connection coil drawing 3.0 W, it integrates switching directly on the actuator. While the cylinder body rates to 1.0 MPa, the integrated valve limits the practical operating pressure range to 0.15-0.8 MPa.
This assembly generates 628N of push force and 528N of pull force at 0.5 MPa. It includes a magnet for CMSE reed and DMSE electronic sensors. The manifold connects to the cylinder via O8 x O5 PU tubing, and the unit is factory-set to retract the rod when the coil energises, which you can reconfigure to extend-when-energised by repositioning the valve.
Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×200 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B Is Used
Decentralized Stations
Eliminates remote valve plumbing on large machines by switching the 40mm bore actuator directly from a single DC24V signal.
Compact Assembly Lines
Saves panel space and reduces tubing complexity where multiple cylinders operate independently within tight machine envelopes.
Retrofit Automation
Ideal for upgrading older pneumatic setups where adding new air lines to a central manifold is costly or impractical.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B the Right Choice?
Choose this self-valved SAIF40 unit when decentralized control beats running tubing back to a remote panel, saving space and wiring. If you need higher force, stepping up to the bore 50 model provides 982N push at 0.5 MPa. For lighter duties, the bore 32 variant offers 402N. Remember the 5/2 valve routes air but does not lock the load; for position holding consider a SAIL lock cylinder. When replacing, match the 200mm stroke, PT1/8 cylinder port, 1/8 valve port, DC24V terminal coil, and -S magnet. At 200mm stroke, ensure adequate guidance to prevent side-load wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B FAQ
At 0.5 MPa, this 40mm bore cylinder provides 628N of push force and 528N of pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and supports a maximum frequency of 5 cycles per second.
Yes. The factory setting retracts the piston rod when the DC24V coil is energised. You can reconfigure it to extend-when-energised simply by repositioning the built-in 5/2 valve on the manifold block.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X200S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.