Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 225mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke225 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B
The AirTAC SAIF40X225S-06B is a double-acting ISO 15552 profile cylinder with a built-in 4M210-06 5/2 solenoid valve. Driven by a DC24V terminal coil drawing 3.0W, it delivers a 628N push force at 0.5MPa. While the bare cylinder rates to 1.0MPa, the practical operating range for this valved unit is 0.15-0.8MPa. The integrated manifold uses an O8xO5 PU tube, eliminating separate remote plumbing.
By default, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. This self-contained design requires only one coil signal to switch, saving panel space. The -S magnet supports CMSE reed and DMSE electronic sensors for precise positioning feedback.
Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 225 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×225 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B Is Used
Decentralized Assembly Stations
Eliminates the need for a remote valve island on large machines by switching the cylinder directly from a single DC24V signal.
Space-Constrained Machinery
The integrated manifold block saves valuable panel and floor space by removing extensive tubing runs to a central control cabinet.
Retrofit Automation
Ideal for upgrading older equipment where adding new pneumatic plumbing is difficult, relying on simple electrical wiring instead.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B the Right Choice?
Choose this 40mm bore when you need 628N of push force at 0.5MPa, stepping up from the 32mm bore (402N) for higher load capacity, or stepping down from the 50mm bore (982N) to save space. A self-valved SAIF is ideal for decentralized stations where running separate valve tubing is costly. It includes a carbon steel rod and PT tapered threads.
For replacement, match the 40mm bore, 225mm stroke, 1/8" cylinder port, 06 (1/8") valve port, DC24V voltage, terminal entry, and -S magnet. Since the 225mm stroke is over 300mm, ensure adequate side-load guidance to prevent rod binding. Remember, the 5/2 valve routes air but does not lock the load; for position holding, consider a SAIL lock cylinder.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B FAQ
The 40mm bore provides 628N push and 528N pull force at 0.5MPa. The built-in 4M210-06 valve has a 14.0mm2 orifice (Cv 0.78) and a max frequency of 5 cycles/sec.
The factory default setting retracts the rod when the coil is energised. Because it uses a 5/2 pilot valve, it can be easily reconfigured to extend-when-energised by repositioning the valve, requiring no separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X225S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.