Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 600mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke600 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B
The AirTAC SAIF40X600S-06B is a double-acting ISO 15552 profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. This integrated valve delivers a 14.0 mm2 flow (Cv 0.78) and operates at up to 5 cycles per second. Configured with a DC24V terminal electrical entry consuming 3.0 W, it achieves IP65 protection and a 0.05 s activation time. The cylinder bore uses a PT 1/8 port, while the integrated valve features a PT 1/8 port, connected via an O8 x O5 PU tube.
While the bare cylinder rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa. At 0.5 MPa it provides 628 N of push force and 528 N of pull force. By default, the piston rod retracts when the coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve. The included -S magnet works with AirTAC CMSE reed and DMSE electronic sensors for precise position feedback.
Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×600 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B Is Used
Decentralized Automation
Ideal for large machines with multiple stations, eliminating long valve tubing runs by switching directly from the cylinder body.
Compact Assembly Lines
Saves valuable panel and floor space by integrating the 5/2 valve directly onto the ISO 15552 profile cylinder.
Retrofit & Upgrades
Perfect for upgrading existing pneumatic setups where running new air lines to a remote manifold is costly or impractical.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B the Right Choice?
Choose this self-valved SAIF unit to eliminate remote valve plumbing and save panel space in decentralized machine stations. If your application requires greater thrust, stepping up to the bore 50 neighbor yields 982 N of push force at 0.5 MPa. For lighter duties, the bore 32 option provides 402 N. This specific model is specified with a 4M210-06 valve, DC24V voltage, PT thread, a terminal electrical entry, and a magnet for CMSE/DMSE sensors.
Because the stroke is 600 mm, ensure adequate guiding to prevent excessive side-load on the rod and seal. Remember that the built-in 5/2 valve routes air but does not lock the load; for true position holding under pressure loss, consider the SAIL lock or BSAI clamp-lock series instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B FAQ
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. The built-in 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78).
The built-in 5/2 valve allows the cylinder to switch itself from one coil signal, saving panel space and tubing. By default, the rod retracts when the DC24V coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X600S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.