Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 75mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke75 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC12V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F
The AirTAC SAIF40X75-06F is a double-acting ISO 15552 profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. This specific SKU is configured with a DC12V terminal entry coil drawing 3.0 W, protected to IP65 and responding in 0.05 s. The integrated valve has a 14.0 mm2 orifice (Cv 0.78) and operates at 0.15-0.8 MPa, making this the practical working pressure range for the assembled unit even though the cylinder body rates to 1.0 MPa. With a 40 mm bore, it delivers 628 N of push force at 0.5 MPa.
By mounting the valve directly via a manifold block and O8 x O5 PU tubing, this unit switches itself from a single coil signal, eliminating remote plumbing. The factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. The cylinder features a carbon steel rod and PT1/8 cylinder ports, while the valve uses a PT1/8 port (code 06).
Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC12V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×75 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| F | Coil voltage DC12V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F Is Used
Decentralized Assembly Stations
Eliminates the need to run long valve tubing back to a central manifold, driving the 40 mm bore directly from a local DC12V signal.
Compact Clamping Jigs
Saves panel space by integrating the 4M210-06 valve right on the cylinder, providing 628 N of clamping force in a tight footprint.
Retrofit Automation
Ideal for upgrading existing lines where adding a separate valve island is too costly, simply wiring a 12V terminal coil to the actuator.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F the Right Choice?
Choose this 40 mm bore when you need moderate thrust (628 N push at 0.5 MPa) and want to step up from the 32 mm bore (402 N) without the bulk of a 50 mm bore (982 N). A self-valved SAIF beats a separate cylinder plus remote valve when panel space is tight or for decentralized stations across a large machine, as it requires only a DC12V electrical signal and a main air supply. The 5/2 valve routes air internally and holds its position via pilot pressure, but it is not a lock; if you need true load-holding, use a SAIL lock or BSAI clamp-lock cylinder instead. For replacements, match the 40 mm bore, 75 mm stroke, 06 valve port, DC12V voltage, terminal entry, PT thread, and no magnet (-S).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F FAQ
The 40 mm bore provides 628 N push and 528 N pull force at 0.5 MPa. The built-in 4M210-06 valve has a 14.0 mm2 orifice with a Cv of 0.78.
The built-in 5/2 valve allows the cylinder to switch itself without a separate remote valve, saving space and plumbing. The factory setting retracts the rod when the DC12V coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X75-06F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.