Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A is a genuine double-acting ISO 15552 cylinder with a Ø40mm bore, 80mm stroke and a built-in 4M210-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke80 mm
- Built-in valve4M210-08
- Valve port1/4"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A
The AirTAC SAIF40X80-08A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-08 5/2 solenoid valve. This specific configuration uses an AC220V terminal coil and delivers a 16.0 mm2 effective area (Cv 0.89). Because the valve manifold mounts directly using an O8 x O5 PU tube, it eliminates remote plumbing. The cylinder itself rates to 1.0 MPa, but the practical SAIF operating range is 0.15-0.8 MPa due to the valve's pilot pressure limits.
In this 40mm bore build, the rod retracts when the coil is energised at the factory setting, but you can reposition the valve to extend-when-energised. It delivers 628N of push force at 0.5 MPa. The unit switches itself from one coil signal, making it ideal for decentralized stations across large machines where panel space is tight.
Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-08 (5/2) |
|---|---|
| Valve flow | 16.0 mm² (Cv 0.89) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 40×80 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M210-08. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A Is Used
Decentralized Stations
Perfect for large machines with decentralized stations, eliminating long valve tubing runs by switching directly from the AC220V coil signal.
Space-Tight Machines
Fits into compact machinery where panel space is scarce, integrating the 4M210-08 valve and cylinder into one self-switching assembly.
Retrofit Upgrades
Ideal for retrofits where running new valve tubing is costly, providing a standalone 628N actuator driven by a single terminal connection.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A the Right Choice?
Choose this 40mm bore when you need 628N push force at 0.5 MPa. If your application requires less force, the 32mm bore offers 402N; stepping up to the 50mm bore provides 982N. A self-valved SAIF beats a separate cylinder plus remote valve in space-constrained machines by cutting tubing and wiring. This model has a PT1/4 cylinder port and a 1/4 inch valve port. It uses a standard carbon steel rod and no magnet. For load-holding, note the 5/2 valve routes air but is not a lock; consider SAIL for locking needs.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A FAQ
The 40mm bore generates 628N push and 528N pull force at 0.5 MPa. The built-in 4M210-08 valve has a 16.0 mm2 orifice (Cv 0.89) and a maximum frequency of 5 cycles per second.
It uses a 5/2 solenoid valve that holds position via internal pilot, not a spring. This AC220V terminal entry model retracts the rod when energised at the factory, but can be reconfigured to extend-when-energised. No separate remote valve is needed.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF40X80-08A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.