Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A is a genuine double-acting ISO 15552 cylinder with a Ø50mm bore, 100mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ50 mm
- Stroke100 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A
The AirTAC SAIF50X100S-06A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. Equipped with a 1/8" valve port and a 1/4" cylinder port, it delivers a Cv of 0.78 and generates 982N of push force at 0.5 MPa. Driven by an AC220V terminal-entry coil consuming 3.5 VA, it responds in 0.05s. Although the cylinder body rates to 1.0 MPa, the built-in valve limits the practical operating range to 0.15-0.8 MPa.
By default, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. The manifold connects to the cylinder via O8xO5 PU tubing, meaning one 220V signal switches the actuator directly. This eliminates remote plumbing and makes the unit ideal for decentralized machine stations. The -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.
Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 50×100 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A Is Used
Decentralized Stations
Mount directly at the point of operation to eliminate long tubing runs from a central valve island.
Compact Clamping
Provides 982N of push force for mid-duty clamping without occupying valuable panel space.
Retrofit Automation
Drops into existing machines needing a self-switching actuator, minimizing wiring complexity.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A the Right Choice?
Choose this 50mm bore when 32mm (402N push) is insufficient but 63mm (1559N) is excessive. A self-valved SAIF excels over a separate cylinder and remote valve when panel space is tight and running tubing is costly. For matching replacements, verify the 100mm stroke, 1/4" cylinder port, 1/8" valve port, AC220V terminal coil, PT threads, and -S magnet. Remember, the 5/2 valve routes air but does not lock the load; for true position holding under pressure loss, select an AirTAC SAIL lock cylinder instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A FAQ
The 50mm bore generates 982N push and 825N pull force at 0.5 MPa. The integrated 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and operates at a maximum frequency of 5 cycles per second.
It uses an AC220V terminal-entry coil (3.5 VA, IP65). The factory setting retracts the rod when energised, but you can reposition the valve to extend-when-energised. This self-contained design requires no separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF50X100S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.