Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B is a genuine double-acting ISO 15552 cylinder with a Ø50mm bore, 600mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ50 mm
- Stroke600 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B
The AirTAC SAIF50X600S-06A is a double-acting profile cylinder with an integrated 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78 and a 14.0 mm2 effective area. Driven by a DC24V terminal coil consuming 3.0 W, it activates in 0.05 s or less with an IP65 rating. Because the cylinder body rates to 1.0 MPa but the manifold valve operates at 0.15-0.8 MPa, the practical working pressure for this assembled unit is 0.15-0.8 MPa. At 0.5 MPa it yields 982 N of push force and 825 N of pull force.
This assembly includes a magnet for CMSE and DMSE sensors, utilizing a carbon steel piston rod and PT tapered threads. By default, the rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. The manifold links the valve to the cylinder using O8 x O5 PU tubing, meaning the 1/8" valve port and the 1/4" cylinder port are distinct. This self-contained design eliminates the need for a remote valve, reducing tubing and panel space for decentralized installations.
Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 50×600 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B Is Used
Decentralized Machine Stations
Ideal for large machines where installing a remote valve bank is impractical, allowing local cylinder control from a single DC24V signal.
Space-Constrained Automation
Perfect for tight envelopes where minimizing external plumbing and panel space is critical to the overall machine design.
Long-Stroke Handling
Suitable for extended 600 mm material handling tasks, provided external guides are used to manage rod side loads.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B the Right Choice?
Choose this self-valved SAIF assembly when your machine layout demands decentralized stations and running separate valve tubing is costly or impractical. If you need higher thrust in a comparable footprint, stepping up to a 63 mm bore increases push force to 1559 N at 0.5 MPa, whereas dropping to a 40 mm bore reduces it to 628 N. For this 600 mm stroke, adding an external guide is recommended to prevent excessive side loads on the piston rod. Remember that the 5/2 valve routes air but does not lock the load; if you need true position holding under pressure loss, consider the SAIL lock variant instead. To replace this exact unit, match the 50 mm bore, 600 mm stroke, 06 valve port, DC24V voltage, terminal entry, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B FAQ
The cylinder provides 982 N of push force and 825 N of pull force at 0.5 MPa. The built-in 4M210-06 valve has an effective area of 14.0 mm2 and a Cv of 0.78.
No, it switches itself from one DC24V coil signal using the built-in 5/2 valve. By default, the rod retracts when the coil is energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF50X600S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.