Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B is a genuine double-acting ISO 15552 cylinder with a Ø50mm bore, 75mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ50 mm
- Stroke75 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B
The AirTAC SAIF50X75-06B is a double-acting ISO 15552 profile cylinder featuring a built-in 4M210-06 5/2 solenoid valve. This specific SKU is configured with a DC24V terminal electrical entry, drawing just 3.0 W of power and responding in 0.05 s or less. The integrated valve has a 14.0 mm2 orifice (Cv 0.78) and cycles up to 5 times per second. Because the valve is mounted directly via a manifold block and short PU tubing (O8 x O5), it eliminates the need for a remote valve, saving panel space and simplifying decentralized machine layouts.
While the bare cylinder body rates to 1.0 MPa, the practical operating pressure for this assembled SAIF unit is 0.15-0.8 MPa, matching the internal piloted 5/2 valve limits. In its factory setting, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if the application requires it. At 0.5 MPa, this 50 mm bore generates 982 N of push force and 825 N of pull force, operating at speeds of 30-800 mm/s. Note that the cylinder port is 1/4, while the valve port is 1/8 (PT thread).
Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 50×75 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B Is Used
Decentralized Stations
Ideal for large machines with multiple actuation points, as the built-in valve removes the need to run long air tubes back to a central manifold.
Space-Tight Machines
The manifold-mounted valve shrinks the overall footprint, fitting neatly into compact cells where external valve plumbing would cause interference.
Wiring Simplification
With a DC24V terminal entry, electricians can wire the coil directly at the cylinder, reducing cable runs back to the main control panel.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B the Right Choice?
Choose this self-valved SAIF50X75-06B when you need decentralized actuation without the plumbing complexity of a separate cylinder and remote valve. The integrated DC24V terminal coil means a single electrical signal drives the motion. If your machine requires less force, stepping down to a 40 mm bore yields 628 N push at 0.5 MPa; stepping up to a 63 mm bore provides 1559 N. Because this unit uses a 5/2 pilot valve rather than a mechanical lock, it will not hold a load without live air pressure—consider the SAIL series if you need pneumatic load holding.
When replacing this unit, match the 50 mm bore, 75 mm stroke, 1/4 cylinder port, and 1/8 valve port. Ensure the coil is specified as DC24V with a terminal entry and PT threads. This standard configuration uses a carbon steel rod and lacks a magnet; if you need position sensing, select an -S variant to support AirTAC CMSE reed or DMSE electronic solid-state switches.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B FAQ
At 0.5 MPa, this 50 mm bore cylinder outputs 982 N of push force and 825 N of pull force. The integrated 4M210-06 valve has an effective area of 14.0 mm2 (Cv 0.78) and can cycle up to 5 times per second.
No, the SAIF50X75-06B switches itself using the built-in 4M210 valve. It operates on DC24V power. By factory default, energising the coil retracts the rod, but the valve can be repositioned to extend-when-energised if needed.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF50X75-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.