Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B is a genuine double-acting ISO 15552 cylinder with a Ø50mm bore, 900mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ50 mm
- Stroke900 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B
The AirTAC SAIF50X900-06B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M210-06 5/2 solenoid valve. This built-in valve delivers a 14.0 mm2 effective area (Cv 0.78) and operates via a DC24V terminal connection coil drawing 3.0 W. Because the valve manages airflow directly at the actuator, you eliminate remote plumbing and save panel space, making it ideal for decentralized machine stations. The assembly operates safely within a 0.15-0.8 MPa pressure range, as the valve limits the cylinder's 1.0 MPa base rating.
Delivering 982N of push force at 0.5 MPa and 1374N at 0.7 MPa, this 50mm bore unit uses an O8 x O5 PU tube between the manifold and cylinder. The factory setting retracts the piston rod when the coil is energised, but you can reconfigure the valve physically to extend-when-energised. It supports speeds of 30-800 mm/s and includes adjustable air cushions at both ends to decelerate the rod near stroke limits.
Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø50 mm |
| Stroke | 900 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/4 |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 50×900 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B Is Used
Decentralized Sorting
Eliminates remote valve banks on long conveyor lines by switching the 900mm stroke directly from a single DC24V signal.
Space-Constrained Machinery
Saves valuable panel space by mounting the 5/2 valve and manifold directly onto the ISO 15552 profile cylinder body.
Retrofit Automation
Ideal for upgrading older machines where routing new pneumatic tubing to a central control block is impractical.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B the Right Choice?
Choose this self-valved SAIF model when a long 900mm stroke is needed but running separate valve tubing is costly or impractical. If your application requires less force, stepping down to a 40mm bore yields 628N push at 0.5 MPa; if higher force is needed, a 63mm bore provides 1559N. For this 900mm stroke, ensure adequate side-load protection and use external guide rails to prevent rod binding, as the cushion only decelerates near the end caps and cannot hold a load mid-stroke. For true load-holding or safety locking, consider the SAIL series instead.
When replacing this unit, match the 50mm bore, 900mm stroke, 1/4" cylinder port, 4M210-06 valve (1/8" valve port), DC24V terminal coil, PT thread, and no magnet (-S omitted). Adding an -S magnet enables CMSE reed and DMSE electronic sensors for position feedback.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B FAQ
The 50mm bore generates 982N push force at 0.5 MPa and 1767N at 0.9 MPa. The built-in 4M210-06 valve has a 14.0 mm2 orifice (Cv 0.78) and a maximum frequency of 5 cycles per second.
By factory default, the rod retracts when the coil is energised. The 5/2 valve holds position by internal pilot, not a spring, and can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF50X900-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.