Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 100mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke100 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A
The AirTAC SAIF63X100-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. Delivering a Cv of 1.68 via a 3/8 inch valve port, it generates 1559N of push force at 0.5 MPa. This unit is configured with an AC220V terminal entry coil consuming 3.5 VA, protected to IP65 with a 0.05s response time. Because the valve manifold uses O10xO6.5 PU tubing, the 3/8 inch valve port remains distinct from the cylinder's 3/8 inch port.
While the bare cylinder rates to 1.0 MPa, the practical SAIF operating range is 0.15-0.8 MPa due to the internal pilot valve. The factory setting retracts the carbon steel piston rod when the coil is energised, but you can reposition the valve to extend-when-energised. By driving itself from a single electrical signal, this assembly eliminates remote plumbing and is ideal for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×100 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A Is Used
Decentralized Assembly Stations
Ideal for large machines where running individual valve lines is costly, letting each station control its own actuation locally via a single 220V signal.
Mid-Force Clamping
Provides 1559N of push force at 0.5 MPa for securely holding medium-weight workpieces during machining operations.
Compact Retrofitting
Perfect for upgrading existing frames where adding a separate valve island is impossible, integrating the 4M310-10 valve directly on the cylinder body.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A the Right Choice?
Select this 63mm bore when a 50mm bore (982N push at 0.5 MPa) is insufficient but an 80mm bore (2513N push at 0.5 MPa) is oversized. The self-valved SAIF63X100-10A excels over a separate cylinder and remote valve when panel space is tight and running pneumatic tubing is costly. An AC220V terminal coil suits standard mains wiring. Remember the 5/2 valve routes air but does not hold the load without live pressure; for true mechanical locking, consider the SAIL series. Replacement requires matching the 63mm bore, 100mm stroke, 3/8 valve port, AC220V terminal entry, PT thread, and no magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A FAQ
The 63mm bore generates 1559N push and 1402N pull force at 0.5 MPa. The built-in 4M310-10 5/2 valve has a 30.0 mm2 orifice with a Cv of 1.68.
No, the integrated 4M310 valve switches the cylinder directly from one AC220V coil signal. By default, the rod retracts when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X100-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.