Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A
The AirTAC SAIF63X1000-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides a Cv of 1.68 and an effective area of 30.0 mm2, driving the 63mm bore to deliver 1559N of push force at 0.5 MPa. Configured with an AC220V terminal coil consuming 3.5 VA, it activates in 0.05 seconds. Because the valve operates at 0.15-0.8 MPa, this defines the practical working pressure for the assembled unit, even though the cylinder body rates to 1.0 MPa.
By controlling itself from a single coil signal, this unit eliminates remote plumbing and saves panel space, making it perfect for decentralized machine stations. The manifold connects the valve to the cylinder using O10 x O6.5 PU tubing, while the valve port is 3/8" and the cylinder port is PT3/8". Factory set to retract the rod when energized, the valve can be repositioned to extend-when-energised. Note that the 5/2 valve routes air but does not lock the load; for position holding, consider the SAIL series instead.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A Is Used
Decentralized Automation
Ideal for large machines where running individual valve tubing is costly, this cylinder controls itself via a single AC220V electrical signal.
Long-Stroke Material Handling
The 1000mm stroke and 1559N force suit long push and pull operations on conveyor lines, provided external guides support the rod.
Space-Constrained Machinery
By integrating the 4M310-10 valve directly on the cylinder body, it saves valuable panel space and reduces pneumatic plumbing complexity.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A the Right Choice?
Choose this self-valved SAIF63X1000-10A when a decentralized installation is more efficient than running long air lines to a remote valve bank. The 63mm bore yields 1559N push and 1402N pull at 0.5 MPa; if your application requires less force, stepping down to the 50mm bore offers 982N push, whereas the 80mm bore provides 2513N for heavier loads. The AC220V terminal entry suits standard industrial power, and the 3/8" valve port matches the 4M310-10 flow rate of Cv 1.68.
When specifying this 1000mm stroke configuration, note that strokes of 300mm or longer require careful attention to side loads. Ensure external guide rails are used to prevent rod damage and premature seal wear. For replacements, verify the 63mm bore, 1000mm stroke, 3/8" valve port, AC220V voltage, terminal entry, PT thread, and the absence of a magnet (-S).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A FAQ
The 63mm bore generates 1559N of push force and 1402N of pull force at 0.5 MPa. The built-in 4M310-10 5/2 valve has an effective area of 30.0 mm2 and a Cv of 1.68.
No, the SAIF63X1000-10A has a built-in 4M310 valve. It operates from a single AC220V coil signal. Factory set to retract when energized, the valve can be repositioned to extend-when-energised. It switches at a max frequency of 4 cycles per second.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.