Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B
The AirTAC SAIF63X1000-10B is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve. This specific configuration pairs a 63mm bore with a 1000mm stroke, yielding 1559N of push force at 0.5 MPa and 2182N at 0.7 MPa. The integrated valve provides a 30.0mm2 effective area (Cv 1.68) and operates at a maximum frequency of 4 cycles per second. Because the valve manifold mounts directly to the cylinder using O10xO6.5 PU tubing, it eliminates the need for remote plumbing and saves panel space.
This unit features a DC24V terminal entry coil drawing 3.0W, protected to IP65 with a 0.05s activation time. While the cylinder body rates to 1.0MPa, the built-in valve limits the practical SAIF operating range to 0.15-0.8MPa. From the factory, the piston rod retracts when the coil is energized, but you can reposition the valve to extend-when-energized. The 5/2 valve routes air but does not lock the load; for position holding, consider the SAIL series.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B Is Used
Large Machine Automation
Ideal for decentralized stations on wide machinery where running individual air lines from a central valve bank is costly and complex.
Material Handling Diverters
Provides robust 1559N push force for diverting packages on long conveyor lines, switching itself locally via the DC24V signal.
Space-Constrained Retrofits
Drops into existing ISO 15552 footprints where electrical panel space is tight, eliminating the need to mount a separate 4M310 valve.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B the Right Choice?
Choose this self-valved SAIF63X1000-10B when you need decentralized actuation across a large machine without running long valve lines. Stepping down to a 50mm bore drops the 0.5MPa push force to 982N, whereas moving up to an 80mm bore increases it to 2513N. The 4M310 valve uses a 3/8" port code (10) and PT tapered threads. To replace this exact unit, match the 63mm bore, 1000mm stroke, 3/8" valve port, DC24V terminal coil, and standard carbon steel rod.
At 1000mm of stroke, the piston rod is highly susceptible to side loads. Always use a guide rail or external load support to prevent binding and premature seal wear. The cylinder speed ranges from 30-800mm/s, and adding an -S magnet allows for CMSE reed or DMSE electronic sensor tracking.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B FAQ
At 0.5MPa, the 63mm bore provides 1559N of push force and 1402N of pull force. The built-in 4M310-10 valve has an effective area of 30.0mm2 (Cv 1.68) for optimal air flow.
No, the 4M310 5/2 valve is built directly into the manifold. By default, the rod retracts when the DC24V coil is energized, but the valve can be repositioned to extend-when-energized.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X1000-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.