Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 150mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke150 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B
The AirTAC SAIF63X150-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This built-in valve provides a Cv of 1.68 and operates at 0.15-0.8 MPa, which governs the practical working range of the assembled unit even though the cylinder body rates to 1.0 MPa. Supplied with a DC24V terminal coil drawing 3.0 W, it offers IP65 protection and a 0.05 s response time. The carbon steel rod and PT3/8 cylinder ports match standard expectations.
By default, the factory setting retracts the piston rod when the coil is energised, but this can be reconfigured to extend-when-energised by repositioning the valve. The manifold uses O10 x O6.5 PU tubing to link the valve to the cylinder, meaning the 1/4" or 3/8" valve ports differ from the cylinder ports. This self-switching design eliminates remote valves, reducing tubing and panel space for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×150 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B Is Used
Decentralized Automation
Ideal for large machines with decentralized stations, eliminating long tubing runs to a remote valve panel by controlling the cylinder directly via its integrated 4M310 valve.
Mid-Force Clamping
Provides 1559N of push force at 0.5 MPa, suitable for mid-weight clamping and holding tasks in machining or assembly fixtures.
Space-Constrained Retrofit
Perfect for retrofits where adding a separate valve manifold is too costly or space-prohibitive, as the built-in valve and terminal coil simplify wiring and plumbing.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B the Right Choice?
Choose this 63mm bore when you need higher mid-range force, delivering 1559N push and 1402N pull at 0.5 MPa. If your application requires less force, the 50mm bore offers 982N push at 0.5 MPa; for heavier loads, the 80mm bore provides 2513N push at 0.5 MPa. A self-valved SAIF63X150-10B beats a separate cylinder plus remote valve when decentralised control is required, as it switches itself from one DC24V coil signal without extensive pneumatic plumbing.
When ordering a replacement, verify the 63mm bore, 150mm stroke, PT3/8 cylinder ports, 4M310-10 valve with 3/8" valve ports, DC24V voltage, terminal entry, and PT thread. Note that the 5/2 valve routes air but does not hold the load without live pressure; for position holding, consider the SAIL lock series. At 150mm stroke, ensure adequate guiding to prevent excessive side loads on the rod.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B FAQ
At 0.5 MPa operating pressure, the 63mm bore provides 1559N of push force and 1402N of pull force. The practical operating pressure range is 0.15-0.8 MPa, limited by the built-in 4M310-10 valve.
Yes. The factory setting retracts the rod when the DC24V coil is energised, but you can reconfigure it to extend-when-energised by repositioning the 5/2 valve on the manifold block.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X150-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.