Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 150mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke150 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B
The AirTAC SAIF63X150S-10B is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, delivering a Cv of 1.68. It features a 63mm bore, 150mm stroke, and a carbon steel piston rod. The integrated valve operates at 0.15-0.8 MPa, which sets the practical working range for the assembled unit even though the cylinder itself rates to 1.0 MPa. A DC24V terminal connection drives the coil, drawing 3.0 W with IP65 protection and a 0.05s response time.
By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. This self-switching design eliminates the need for a separate remote valve, reducing panel space and tubing. The manifold uses PU tubing (O10 x O6.5) to bridge the valve and cylinder, and the -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×150 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B Is Used
Decentralized Automation
Perfect for large machines with decentralized stations, eliminating long tubing runs by switching directly from a DC24V signal.
Mid-Force Handling
Delivers 1559N push force at 0.5 MPa, ideal for clamping, lifting, and pressing tasks in space-tight machine frames.
Retrofit Upgrades
An excellent drop-in upgrade for older systems, adding self-valving control without extensive pneumatic rewiring.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B the Right Choice?
Choose this 63mm bore when you need higher force than a 50mm cylinder (982N push at 0.5 MPa) but want to avoid the larger envelope of an 80mm model (2513N push). The SAIF63X150S-10B is ideal for decentralized stations where running separate valve tubing is costly, as it switches itself from one coil signal. The 4M310-10 valve provides a 3/8" port, while the cylinder port is PT 3/8". For replacement, match the 63mm bore, 150mm stroke, 3/8" valve port, DC24V terminal coil, PT thread, and -S magnet. Note that the 5/2 valve routes air but does not hold the load without live pressure; for true locking, consider the SAIL series.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B FAQ
The 63mm bore cylinder provides 1559N push and 1402N pull force at 0.5 MPa. The built-in 4M310-10 valve has a 30.0mm2 orifice with a Cv of 1.68.
Yes. The factory setting retracts the rod when the DC24V coil is energised, but you can reposition the valve to extend-when-energised. This 5/2 valve holds position by pilot pressure, not a spring.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X150S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.