Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 160mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke160 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A
The AirTAC SAIF63X160S-10A is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M310-10 5/2 solenoid valve, yielding a Cv of 1.68 and a 30 mm2 effective orifice. Driven by an AC220V terminal-entry coil drawing 3.5 VA with IP65 protection, it responds in 0.05 s. The integrated manifold uses O10 x O6.5 PU tubing to bridge the valve and cylinder. Because the 4M310 valve operates at 0.15-0.8 MPa, this defines the practical working pressure for the assembled SAIF unit, even though the bare cylinder rates to 1.0 MPa.
At 0.5 MPa this 63 mm bore generates 1559 N of push force and 1402 N of pull force, peaking at 318 kgf under 1.0 MPa. The factory setting retracts the carbon steel piston rod when the coil is energised, but you can reposition the valve to extend-when-energised if your logic demands it. A magnet option (-S) is included, supporting AirTAC CMSE reed and DMSE electronic sensors for position feedback. By switching itself from one coil signal, this decentralized unit eliminates remote valve plumbing and saves panel space.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×160 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A Is Used
Decentralized Assembly Lines
Eliminates the need for a central valve bank, letting each 63 mm station control its own extend and retract cycles directly from the AC220V signal.
Space-Constrained Machinery
The built-in 4M310 valve and manifold block save critical panel space while delivering 1559 N of push force at 0.5 MPa for compact clamping.
Retrofit Automation Upgrades
Ideal for upgrading older machines where running long pneumatic lines to a remote valve is costly, utilizing the O10 x O6.5 PU tube manifold.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A the Right Choice?
Select this self-valved SAIF over a plain SAI cylinder and separate remote valve when you need to cut down tubing runs across a large machine. The 4M310-10 valve handles up to 4 cycles per second, making it ideal for decentralized stations. If your application requires less force, stepping down to the 50 mm bore yields 982 N push at 0.5 MPa; stepping up to the 80 mm bore provides 2513 N. Remember the 5/2 valve routes air but does not lock the load—use SAIL or BSAI for true position holding.
When replacing this unit, match the 63 mm bore, 160 mm stroke, PT3/8 cylinder port, 4M310-10 valve port, AC220V voltage, terminal entry, PT thread, and the -S magnet. The 160 mm stroke is well within standard limits, but always ensure proper guide support to manage side loads effectively.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A FAQ
The 63 mm bore provides 1559 N push and 1402 N pull force at 0.5 MPa. The built-in 4M310-10 valve has an effective area of 30 mm2 (Cv 1.68) and supports up to 4 cycles per second.
No, the integrated 4M310 5/2 solenoid valve switches the cylinder directly from an AC220V terminal signal. By default it retracts when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.