Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 160mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke160 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B
The AirTAC SAIF63X160S-10B is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve. Delivering a Cv of 1.68 and a 30 mm2 effective orifice, this integrated manifold block eliminates the need for a separate remote valve, saving valuable panel space and plumbing time. The unit is configured with a DC24V terminal electrical entry drawing 3.0 W, features an IP65 rating, and activates in 0.05 s or less. A carbon steel piston rod and an -S magnet for CMSE or DMSE sensors come standard.
Because the cylinder body rates to 1.0 MPa but the internal pilot valve operates from 0.15 to 0.8 MPa, the practical working range for this assembled SAIF unit is 0.15-0.8 MPa. The 63 mm bore generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. Factory set to retract the rod when the coil is energised, the valve can be physically repositioned to extend-when-energised if your sequence demands it. The manifold links the valve to the cylinder barrel using O10 x O6.5 PU tubing, and the 5/2 valve holds its position via pilot pressure rather than a spring.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×160 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B Is Used
Decentralized Automation
Eliminates the need for long pneumatic runs from a central panel by integrating the 4M310-10 valve directly on the cylinder for localized control.
Assembly Line Actuators
Provides 1559 N of push force at 0.5 MPa, ideal for clamping, pressing, and indexing heavy components along automated production lines.
Machine Retrofitting
Simplifies upgrades on older equipment where adding external valve islands is impractical, requiring only a single DC24V electrical signal to operate.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B the Right Choice?
Choose this 63 mm bore if your application requires more force than the 50 mm variant (982 N push at 0.5 MPa) but you want to avoid the larger envelope of an 80 mm cylinder. The self-valved SAIF architecture is optimal for decentralized stations across large machines, as a single DC24V coil signal drives the entire actuator without running lengthy pneumatic tubing back to a main manifold. Remember that the 5/2 valve routes air but does not lock the load mechanically; if you need true position holding under pressure loss, consider the AirTAC SAIL lock or BSAI clamp-lock series instead. For this 160 mm stroke, ensure adequate guide support to handle potential side loads. Replacement units must match the 63 mm bore, 160 mm stroke, PT3/8 cylinder port, 3/8 valve port code 10, DC24V terminal coil, PT thread, and the -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B FAQ
At 0.5 MPa, the 63 mm bore provides 1559 N of push force and 1402 N of pull force. The practical operating pressure range is 0.15-0.8 MPa, limited by the built-in 4M310-10 valve.
Yes, the factory setting retracts the rod when the DC24V coil is energised, but you can reposition the 5/2 valve on the manifold block to extend-when-energised. No separate remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X160S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.