Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B
The AirTAC SAIF63X175S-10B is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific SKU is configured with a DC24V terminal coil, drawing 3.0 W, and includes a magnet for CMSE reed and DMSE electronic sensors. The built-in valve offers an effective area of 30.0 mm2 (Cv 1.68) and operates at up to 4 cycles per second. Because the valve manifold uses O10 x O6.5 PU tubing, the unit controls itself from one coil signal without needing a remote valve.
Although the cylinder body rates to 1.0 MPa, the practical operating range for this assembled SAIF unit is 0.15-0.8 MPa due to the internal pilot valve limits. At 0.5 MPa, this 63 mm bore generates 1559 N of push force and 1402 N of pull force. The factory setting retracts the piston rod when the coil is energised, but you can reconfigure it to extend-when-energised simply by repositioning the valve. The cylinder features a PT3/8 port and variable air cushions at both ends to decelerate the rod near stroke end.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B Is Used
Decentralized Assembly Lines
Eliminates remote valve banks by self-switching at each station, cutting tubing runs and panel space across large automated machinery.
Mid-Force Positioning
Provides 1559 N of push force at 0.5 MPa for mid-sized actuation tasks, reacting in 0.05 s via the integrated 4M310 valve.
Sensor-Ready Conveyors
The -S magnet works with DMSE solid-state and CMSE reed switches to confirm mid-stroke or end-stroke positions on material handling systems.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B the Right Choice?
Choose this self-valved SAIF63X175S-10B when a decentralized station requires moderate force and integrated control. If you need less force, the 50 mm bore provides 982 N push at 0.5 MPa; if your application demands more power, the 80 mm bore offers 2513 N. This 175 mm stroke falls well within the 1500 mm standard maximum, so no side-load guide note is required. Select this DC24V terminal configuration for standard low-power control panels.
A self-switching SAIF cylinder beats a separate cylinder plus remote valve by drastically reducing panel space, wiring, and plumbing. It is ideal for large machines where running valve tubing is costly. Remember that the built-in 5/2 valve routes air but does not lock the load; if your application requires true position holding without live pressure, consider the SAIL (lock) or BSAI (clamp-lock) series. When ordering a replacement, match the 63 mm bore, 175 mm stroke, 10 (3/8) valve port, DC24V voltage, terminal entry, PT thread, and -S magnet.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B FAQ
At 0.5 MPa, this 63 mm bore cylinder generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The practical operating pressure is 0.15-0.8 MPa.
No, the integrated 4M310-10 5/2 solenoid valve (Cv 1.68) switches the cylinder directly from a DC24V signal. By factory default, the rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X175S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.