Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A
The AirTAC SAIF63X200-10A is a double-acting profile cylinder with an integrated 4M310-10 5/2 solenoid valve, delivering a 30 mm2 effective orifice (Cv 1.68) directly on the unit. Driven by an AC220V terminal coil consuming 3.5 VA, it activates in 0.05 seconds with IP65 protection. Because the manifold routes air via PU tubing (O10 x O6.5), the valve port (3/8) differs from the cylinder port (PT3/8). The base cylinder rates to 1.0 MPa, but the practical SAIF operating range is 0.15-0.8 MPa due to the valve limits.
Generating 1559 N of push force at 0.5 MPa, this decentralized unit eliminates remote valve plumbing and saves panel space. The factory setting retracts the rod when the coil is energised, but you can reposition the valve to extend-when-energised. It features a carbon steel piston rod and variable air cushions at both ends to decelerate near stroke limits.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A Is Used
Decentralized Automation
Ideal for large machine layouts where running remote valve tubing is costly, using a single AC220V signal to drive the 63 mm bore directly.
Mid-Force Assembly
Provides 1559 N push force at 0.5 MPa for clamping or pressing parts in space-tight manufacturing cells without external valves.
Retrofits & Upgrades
Simplifies machine upgrades by bundling a 4M310-10 valve and cylinder, reducing pneumatic plumbing and panel footprint instantly.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A the Right Choice?
Choose this 63 mm bore when a 50 mm bore (982 N push at 0.5 MPa) is insufficient, or step up to an 80 mm bore (2513 N push at 0.5 MPa) for heavier loads. The self-valved SAIF design beats a separate cylinder plus remote valve setup by cutting tubing runs and wiring complexity, making it ideal for decentralized stations across large machines. For replacement, match the 63 mm bore, 200 mm stroke, 3/8 valve port, AC220V voltage, terminal entry, PT thread, and no magnet. Note that the 5/2 valve routes air but does not hold the load without live pressure; for position holding, consider the SAIL lock or BSAI clamp-lock series.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A FAQ
The 63 mm bore generates 1559 N push force and 1402 N pull force at 0.5 MPa. The integrated 4M310-10 5/2 valve has a 30 mm2 orifice (Cv 1.68) and operates at a maximum frequency of 4 cycles per second.
Yes. By default, the factory setting retracts the rod when the AC220V coil is energised. You can reconfigure it to extend-when-energised by repositioning the valve on the manifold block, eliminating the need for a separate remote valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.