Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B
The AirTAC SAIF63X200-10B is a double-acting ISO 15552 profile cylinder with a built-in 4M310-10 5/2 solenoid valve, providing a 30 mm2 effective flow area (Cv 1.68). Driven by a DC24V terminal entry coil drawing 3.0 W, it activates in 0.05 s or less. Because the cylinder body rates to 1.0 MPa but the integrated valve operates at 0.15-0.8 MPa, the practical working range for this assembled unit is 0.15-0.8 MPa. The 63 mm bore generates 1559 N of push force at 0.5 MPa.
This self-switching unit eliminates the need for a separate remote valve, reducing panel space and PU tubing runs for decentralized machine stations. The manifold connects to the cylinder via O10 x O6.5 tubing, and the valve features a 3/8 inch port, distinct from the cylinder's own 3/8 inch port. From the factory, the piston rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised if your sequence requires it.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B Is Used
Decentralized Stations
Ideal for large assembly lines where running individual air tubes back to a central valve bank is impractical, letting each station control its own actuation locally.
Compact Clamping
Provides robust 1559 N clamping force in tight machine footprints where an external valve manifold would interfere with moving components.
Wiring Retrofits
Simplifies machine upgrades by replacing older separate valve setups, requiring only a single DC24V electrical signal to drive the cylinder.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B the Right Choice?
Select this 63 mm bore when a 50 mm bore (offering 982 N push at 0.5 MPa) is underpowered, but an 80 mm bore (2513 N push) would be physically oversized. The SAIF63X200-10B excels over a standard cylinder plus remote valve in space-constrained machinery where routing wiring to a central panel is costly. The DC24V terminal coil offers low power consumption and safe integration with modern PLCs. For exact replacements, verify the 200 mm stroke, 3/8 inch valve port, PT tapered threads, and standard carbon steel rod. Note that the 5/2 valve routes air but does not lock the load mechanically; if you need true position holding under zero pressure, consider the SAIL lock variant instead.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B FAQ
At 0.5 MPa, the 63 mm bore provides 1559 N of push force and 1402 N of pull force. The built-in 4M310-10 valve has an effective area of 30 mm2 (Cv 1.68) and a maximum frequency of 4 cycles per second.
The integrated 5/2 valve eliminates the need for separate remote plumbing, saving space and wiring. By factory default, the rod retracts when the DC24V coil is energised, but you can reposition the valve on the manifold to make it extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X200-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.