Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 225mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke225 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A
The AirTAC SAIF63X225S-10A is a double-acting ISO 15552 profile cylinder featuring a built-in 4M310-10 5/2 solenoid valve with a 1.68 Cv flow rate. Driven by an AC220V terminal connection coil consuming 3.5 VA, it integrates switching directly on the actuator. The manifold links the valve to the cylinder via O10 x O6.5 PU tubing, entirely removing the need for remote plumbing. Because the valve limits pressure, the practical working range is 0.15-0.8 MPa.
Generating 1559N of push force at 0.5 MPa, this unit includes a -S magnet for CMSE reed and DMSE electronic sensors. By default, the rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. It controls itself from one signal, making it perfect for decentralized machine stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×225 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A Is Used
Decentralized Assembly Lines
Eliminates valve banks on large machines by switching locally at the cylinder, reducing tubing complexity.
Compact Clamping Stations
Provides 1559N clamping force at 0.5 MPa in tight cells where running remote valve plumbing is costly.
Wiring Retrofits
Simplifies machine upgrades by replacing older remote-valve setups with a single AC220V terminal signal.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A the Right Choice?
Choose this 63mm bore when 50mm (982N push at 0.5 MPa) is insufficient but 80mm (2513N) is oversized. The SAIF excels over a separate cylinder plus remote valve by saving panel space and cutting tubing runs. For loads requiring position holding, note the 5/2 valve routes air but is not a lock; consider SAIL or BSAI. This configuration specifies a 225mm stroke, PT3/8 cylinder port, PT3/8 valve port, AC220V terminal coil, and a magnet for sensors. Since the stroke is 225mm, ensure adequate guide provisions to handle side loads.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A FAQ
The 63mm bore generates 1559N push and 1402N pull force at 0.5 MPa. The integrated 4M310-10 valve provides a 30.0 mm2 effective area (Cv 1.68).
The integrated 5/2 valve switches the cylinder directly from one AC220V signal, saving panel space. Factory default retracts the rod when energised, but it can be reconfigured to extend-when-energised by repositioning the valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X225S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.