Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A
The AirTAC SAIF63X600-10A is a double-acting ISO 15552 profile cylinder featuring an integrated 4M310-10 5/2 solenoid valve. This specific SKU is configured with a 3/8" PT valve port, an AC220V terminal coil, and a carbon steel piston rod. The built-in valve boasts a 30.0 mm2 orifice (Cv 1.68) and cycles up to 4 times per second. Because the valve manifold mounts directly to the cylinder using O10 x O6.5 PU tubing, you eliminate remote plumbing and save panel space, making it perfect for decentralized machine stations.
While the bare cylinder rates to 1.0 MPa, the practical operating range for this valved assembly is 0.15-0.8 MPa. It delivers 1559 N of push force at 0.5 MPa. By factory default, the rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. The 5/2 valve holds position via internal pilot pressure, not a spring, but note that it will not hold a load without live air pressure.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A Is Used
Decentralized Automation
Ideal for large machines where running individual valve tubing back to a main panel is costly; this cylinder switches itself from one AC220V signal.
Material Handling
Provides 1559 N of push force at 0.5 MPa to divert or gate heavy packages on a 600mm stroke without needing a separate remote valve bank.
Space-Constrained Machinery
The integrated 4M310-10 valve and manifold block minimize external plumbing, fitting into tight retrofit spaces where panel room is scarce.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A the Right Choice?
Choose this 63mm bore when a 50mm bore falls short—it jumps from 982 N to 1559 N of push force at 0.5 MPa, whereas an 80mm bore offers 2513 N if you need heavier thrust. A 600mm stroke is well within the 1500mm maximum standard for this bore, but at this length you must account for side-load and use a guide to prevent rod binding. The self-contained AC220V terminal coil draws 3.5 VA and responds in 0.05 s, so you only need one electrical signal to drive the actuator. To replace this unit, match the 63mm bore, 600mm stroke, 10 (3/8") valve port, PT3/8 cylinder port, AC220V terminal voltage, and no magnet (-S).
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A FAQ
The 63mm bore generates 1559 N push and 1402 N pull force at 0.5 MPa. The built-in 4M310-10 valve has a 30.0 mm2 effective area (Cv 1.68) to handle the required air volume.
No, the 4M310-10 5/2 valve is built directly onto the cylinder. Driven by an AC220V terminal coil, it switches the actuator from one signal. By default, the rod retracts when energised, but you can reposition the valve to extend-when-energised.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X600-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.