Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A is a genuine double-acting ISO 15552 cylinder with a Ø63mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A
The AirTAC SAIF63X600S-10A is a double-acting ISO 15552 profile cylinder with an integrated 4M310-10 5/2 solenoid valve, yielding a 30 mm2 effective orifice (Cv 1.68). Driven by an AC220V terminal coil drawing 3.5 VA, it responds in 0.05 s. The integrated manifold uses O10 x O6.5 PU tubing to bridge the valve and cylinder. Because the cylinder body rates to 1.0 MPa but the internal pilot valve operates at 0.15-0.8 MPa, the practical working pressure for the assembled SAIF unit is 0.15-0.8 MPa.
This 63 mm bore generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. Factory set to retract the rod when the coil is energised, the valve can be repositioned to extend on signal. The -S magnet works with AirTAC CMSE reed and DMSE electronic sensors. By switching itself from a single coil signal, it eliminates remote plumbing and suits decentralized stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G3/8 |
| Rod thread | M16×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 63×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A Is Used
Decentralized Assembly Lines
Ideal for large machines where running valve tubing is costly. The integrated 4M310-10 valve lets this 63 mm cylinder switch itself from one AC220V signal.
Long-Stroke Material Handling
The 600 mm stroke provides extended reach for push and transfer tasks. Pair with a guide rail to manage side loads on the rod.
Space-Constrained Retrofits
Saves panel space by mounting the valve directly on the cylinder. The O10xO6.5 PU manifold keeps the air path short and responsive.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A the Right Choice?
Choose this self-valved SAIF63X600S-10A when decentralized stations need 1559 N push at 0.5 MPa without a separate valve bank. If your application requires less force, the 50 mm bore offers 982 N at 0.5 MPa; for higher loads, the 80 mm bore provides 2513 N. The AC220V terminal coil and PT3/8 cylinder port simplify wiring and air supply. For stroke lengths of 600 mm or more, use a guide rail to prevent side loads from damaging the rod seals.
When ordering a replacement, match the 63 mm bore, 600 mm stroke, 10 valve port, AC220V voltage, terminal entry, and -S magnet. Note that the built-in valve routes air but does not lock the load; for position holding, consider an AirTAC SAIL lock cylinder.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A FAQ
The 63 mm bore generates 1559 N push force at 0.5 MPa and 2805 N at 0.9 MPa. The built-in 4M310-10 valve has a 30 mm2 orifice with a Cv of 1.68.
No, the 5/2 valve routes air but does not lock the load; for holding, use an AirTAC SAIL. Factory setting retracts the rod when the AC220V coil is energised, but it can be reconfigured to extend on signal.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF63X600S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.